Bintelli Havoc User Manual (English)

Questions and Answers:

S
Stephanie LeeAug 8, 2025
How to fix a Bintelli Scooter that won't start?
- J
  jeffrey84Aug 8, 2025
  If your Bintelli Scooter engine won't start, it could be due to several reasons: * Fuel not entering the carburetor because fuel isn't flowing from the fuel tank. * A leak in the vacuum line fitting. * A blockage in the fuel line or vacuum hose. To resolve this, check fuel lines for blockages. Also, check the fuel petcock, replace the vacuum line fitting, replace the fuel line, and replace the vacuum hose.
M
Manuel BrownAug 17, 2025
Why is my Bintelli Scooter difficult to start and using too much fuel?
- L
  lopezsaraAug 17, 2025
  If your Bintelli Scooter is hard to start or consumes fuel excessively, the issue might stem from: * A blocked carburetor or an incorrect air/fuel mixture. * Leaks in the carburetor. * A blocked fuel filter. * A worn throttle of the carburetor. * Bad fuel. * A blocked air vent of the fuel tank. * Low fuel. To address this, clean or replace the carburetor, readjust the mixing ratio and concentration of the carburetor, clean the carburetor or replace the carburetor floater, clean the fuel filter, replace the throttle, replace the fuel, remove blockage in the air vent of the fuel tank, and add fuel to the fuel tank.
A
Aaron BurnsAug 27, 2025
What to do if my Bintelli Havoc Scooter is hard to start?
- P
  perezmichaelAug 27, 2025
  If your Bintelli Scooter is hard to start, it may be caused by: * A blocked air filter element. * Leaks in the air filter or too much dust in it. * Leaks in the air filter housing. * Excessive carbon buildup. * Leaks in the exhaust port. * A blocked muffler. To resolve this, clean the air filter element, replace the air filter, repair or change the air filter housing, clean the carbon buildup, replace the cylinder head, and replace the muffler.

Bintelli Havoc Specifications

General

Brand	Bintelli
Model	Havoc
Category	Scooter
Language	English

Summary

Instructions to Users

Precautions

Safety guidelines and warnings for operating the vehicle, including traffic laws and protective gear.

Vehicle Identification Number (VIN) and Engine Number

Details on locating and recording the Vehicle Identification Number (VIN) and Engine Number.

Brief Introduction to the Scooter

Identifies key components of the scooter with numbered labels for easy reference.

Instrument Cluster

Explains the function of each indicator and gauge on the instrument panel.

Left Control Switch

Details the operation of switches located on the left handlebar for lights, horn, and turn signals.

Right Control Switch

Explains the functions of switches on the right handlebar, including lights, starter, and throttle.

Ignition Switch

Guides on using the ignition switch for starting, stopping, and steering lock functions.

Seat Cushion Lock

Instructions on how to use the seat cushion lock to access under-seat storage.

Fuel Tank Access

How to access the fuel tank and important notes on fueling.

Fuel System Components

Details the fuel petcock's function and the importance of the fuel filter for the fuel system.

Technical Specifications

Operating Instructions

Basic Vehicle Information

Details pre-ride checks, maintenance levels, and service intervals for optimal performance.

Kick Starting the Engine

Step-by-step guide on how to start the engine using the kick start lever.

Electric Starting the Engine

Instructions for starting the engine using the electric start button.

Parking the Scooter

Guidance on safely parking the scooter, including using turn signals and brakes.

Service and Maintenance

Regular Service and Maintenance

Outlines general checks and maintenance items to be performed before riding.

Run-in Period Maintenance

Recommendations for the first 500 miles, including speed limits and initial servicing.

500 Mile Service Procedure

Detailed steps for the mandatory 500-mile service, including oil change and valve adjustment.

Level 1 Service Intervals

Tasks to be performed every 1000-1500 miles for Level 1 service.

Level 2 Service Intervals

Additional checks for Level 2 service at 3000-mile intervals.

Level 3 Service Intervals

Tasks for Level 3 service at 6000-mile intervals, including frame and gearbox inspection.

Carburetor Maintenance

Ensuring proper carburetor adjustment and maintenance for optimal performance.

Engine Oil Check and Change

Detailed procedure for checking and changing the engine oil, including filter inspection.

Spark Plug Maintenance

Guide on inspecting, cleaning, and replacing the spark plug for optimal performance.

Air Filter Maintenance

Instructions for cleaning and maintaining the air filter for proper engine intake.

Accelerator Handgrip Adjustment

Procedure for adjusting the throttle grip's free travel for smooth operation.

Front Brake Maintenance

Details on adjusting and maintaining the front disc brake for optimal performance.

Rear Brake Maintenance

Instructions for adjusting and maintaining the rear brake for safe stopping.

Brake Light Adjustment

How to check and ensure the rear brake light functions correctly.

Idle Speed Adjustment

Procedure for adjusting the engine's idle speed for stable operation.

Tire Pressure and Maintenance

Guidelines for checking tire pressure, tread, and wheel nut torque.

Rear Wheel Removal and Installation

Procedure for removing and installing the rear wheel, including torque specifications.

Battery Maintenance

Tips for maintaining the battery's health, including cleaning terminals and charging.

Fuse Maintenance

Information on checking and replacing the fuse to ensure electrical system functionality.

Horn Maintenance

Guidance on adjusting the horn volume and troubleshooting weak or no sound.

Vehicle Storage

Instructions for long-term vehicle storage, including fuel draining and battery care.

Service Interval Table

A comprehensive table outlining service intervals and required actions for various components.

Lubricated Parts Interval

Table detailing the recommended lubrication intervals for various parts.

Common Faults and Troubleshooting

Fuel System Faults

Common faults related to the fuel system and their troubleshooting steps.

Air Intake/Exhaust System Faults

Common faults related to the air intake and exhaust systems and their troubleshooting.

EPA Device Faults

Troubleshooting for emissions control system faults and related causes.

Ignition System Faults

Common faults related to the ignition system, including weak or no spark.

Engine Mechanical Faults

Troubleshooting for engine mechanical issues such as idle problems.

Front Wheel Faults

Troubleshooting for front wheel vibrations, play, and loose nuts.

Rear Wheel Faults

Troubleshooting for rear wheel vibrations and loose nuts.

Suspension System Faults

Troubleshooting for shock absorber issues like lack of rebound or adjustment.

Brake System Faults

Troubleshooting for poor braking performance due to worn pads or fluid issues.

Lighting System Faults

Troubleshooting for issues with the headlight not turning on.

Related product manuals

Bintelli Sprint

46 pages

Bintelli Scorch