Skin Care for life inside and out
®
bt-accent
®
LED quick start guide
1. Read operation manual prior to using the equipment.
2. Do not use the unit if any contraindications are present.
3. Mount the arm into the
mounting post on top of
unit.
4. Plug the CABLE from arm into
receptacle on back of unit
base. Align groove in the plug
with groove in receptacle and
hand tighten.
5. Plug POWER CORD into
base and into standard wall
outlet appropriate for the unit.
To wall
4. Hand tighten SCREW to
stabilize arm.
To Next Page
Need help?
General
