6
Connect drum with
motor base by turning
locking clip clockwise.
Place hopper into guide.
Assembly Instructions
Switch the juicer o before changing accessories or touching any moving
parts. Remove the drum from the main body by turning the locking clip
counter clockwise. Pull the auger forward to disassemble it from the drum set.
!
DO NOT place any metal objects into the hopper. If the drum is clogged or
the machine stops operating, press the reverse button 2 to 3 times and
press the ON button again to resume normal operation.
!
DO NOT immerse the motor in water.
To Next Page
Loading...
