biodex RTM 600 - Quick Start Operation

Figure 4.1. The Quick Start feature allows the user to begin the exercise session with minimal input.
!%#$"$ "$
(See Figure 4.1.)
Although the RTM 600 offers advanced programming capability, it also features a "Quick Start"
function that allows the user to immediately begin exercise on the system with 1/4-mile scaled
track views.
Quick-Start operation is simple. With the system turned ON, position the user on the treadbelt and
proceed as follows:
1. Touch Display. The Opening Menu should now be displayed.
2. Touch <Quick Start>. The Quick Start Exercise Track should now be displayed. (See Figure 4.1)
3. Press <Start> on the display to activate the treadbelt. The treadbelt will ramp up to .01 mph.
4. Touch the <▲> and <▼> arrows on the screen to adjust <Speed> and <Elevation> as desired.
5. Touch the display icons at the bottom left of the screen to toggle between the Quick Start
Exercise Track display and a Numeric display.
6. Touch <Pause> to pause the exercise session at any time. Touch <Resume> to resume the
exercise session.
7. Touch <End> to end the exercise session at any time.
8. Touch <Reset> to return to the Opening screen.
4. QUICK START OPERATION
— 4-1 — QUICK START OPERATION