BioLAB BBWA-102 - Working Conditions; Attentions; Temperature Controller Operation

"&&# $ 
!4'2
"&&#
53$3

6363 $363 $33

!47''2"&&#
33
6
8336 3836 3836

9**":# * *$  5*$
;**":#  $ 5 8
04 Working Conditions
1. Temperature ranges between 5~40 ;℃
2. Relative humidity less than 85% RH;
3. Power: voltage 220-240v, frequency 50-60Hz;
4. No violent vibration and corrosive gas surround the equipment.
05 Attentions
1. Before use, add water 50mm until the water reaches above the clapboard, then connect to
power supply and heat. It is not allowed to heat with insufficient water.
2. During use, do not touch the heating pipe by your hands to avoid being scalded.
3. After use, timely discharge the water, dry it and keep it clean in order to extend the service
life.
06 Temperature Controller Operation
. Meter panel instructionⅰ
www.biolabscientific.com
4
Water Bath BBWA-102