Instructions for first use:
⚫ All parts of the mixer must be thoroughly cleaned before the first use. (Please refer
to: Cleaning section)
⚫ Pull out the bottom power cord of the blender and connect it to the AC power
outlet.
Function Description：
`
⚫ When the power is switched on, the lamp circle lights up once and then goes off, the
digital lights up 00:00, and the product enters the standby state;If the speed knob is
not stopped at the "0" position, the digital will flash 00:00, you need to turn the
knob to "0" position, otherwise the product cannot start.
⚫ The product is designed 6 speed, "0" for standby, "P" for pulse maximum speed,1 to 6
for working speed from low to high.
⚫ Turn the speed knob to start the machine, the lamp ring is long on, then the digital
To Next Page
Loading...