Need help?Do you have a question about the BIOMET Vanguard CR and is the answer not in the manual?
General| Brand | BIOMET |
|---|---|
| Model | Vanguard CR |
| Category | Medical Equipment |
| Language | English |
Overview of the surgical technique for the Vanguard CR Stem Housing.
Guidance on establishing the correct medial-lateral placement of the reamer guide.
Instructions for reaming the intramedullary canal to prepare the femur for the implant.
Procedure for re-cutting the distal femur to accommodate the stem housing attachment plate.
Steps for drilling holes for femoral pegs if peg use is desired.
Process for fitting the trial stem and housing to the femoral component.
Steps to impact the stem, secure screws, and bolt the housing to the femoral component.
Details on the central body, fixing screws, and materials of the CR Vanguard stem housing.
Conditions for which total knee arthroplasty using this implant is recommended.
Conditions that prohibit or increase the risk of failure when using the implant.
Important advisories regarding implant resistance, load, and patient selection for success.
Guidelines for handling, sterilisation, and user responsibilities to ensure implant integrity.
List of possible complications and negative outcomes associated with the implant.
Regulatory notice restricting the device's sale to physician orders only in the USA.
Contact details for further product information and representative assistance.
To Next Page
