7/20 v2 03-13-2020
3/ WINGS
Select the right wing for the right side and the left wing
for the left side (the upper side of the wing is the one
printed).
1 – At rear, snap the back of the wing on the round knob
of the steering mechanism.
2 - Align the wing bone with the shoulder and insert it in
the slot. You should feel a click, meaning that the wing is
correctly inserted. NB: Always hold the wings by the
base, which is robust.
WARNING: To put or remove wings, hold MetaFly by its
motor as indicated by the arrows. Not by its body!
To Next Page
Loading...