BionX Smart - Drive Out Lower Headset Shell

RL39 - Repair instructions for changing the frame
Version 1.0, last revised 03/2016
21/58
T. Removing the headset
77.
Remove the sealing ring from the headset.
78.
Remove the clamping ring from the headset.
79.
Remove the bearing from the headset.
80.
Drive the lower headset shell out of the head tube. To do this, carefully knock
the inside edge of the headset shell with the aid of the hammer and the plastic
drift. Position the tools alternately on opposite points of the headset shell so
that it is not tilted too much in the head tube.
81.
Proceed with the upper headset shell in the same way.