BiOptic Qsep1 User Manual

BiOptic Inc.,
4F., No.108-3, Minquan Rd., Xindian Dist., New Taipei City 23141, Taiwan (R.O.C.)
www.bioptic.com.tw
Revolution
Qsep


BiOptic Qsep1 Specifications

General

Type	Capillary Electrophoresis System
Throughput	Up to 96 samples per run
Application	DNA, RNA, Protein analysis
Capillary Diameter	50 μm
Sample Volume	1-10 µL
Analysis Time	2-5 minutes per sample
Power Requirements	100-240 V, 50/60 Hz
Technology	Microfluidic Capillary Electrophoresis

Summary

1. System Overview

1.1 Pre-program Method and Cartridge

Details on pre-programmed methods and specialized cartridges for efficient testing.

1.2 System Installation

2. Q-Analyzer Installation Instruction

2.1 Software Installation

Step-by-step guide for installing the Q-Analyzer software on the computer.

2.2 Software Mode

3. Start to Use Qsep™ Series

3.1 Operation of Qsep™ Series

Introduces the main window and basic operation of the Qsep™ Series instrument.

3.2 Cartridge Calibration

Details the process of calibrating the cartridge for initial and proper usage.

3.4 Recalibration

3.5 Capillary Clog Check

5. Result/Data Analysis

5.1 Result for Data Display

How to display and interpret raw data and results from the instrument.

5.3 Total RNA Quality Analysis

5.4 Smear DNA Analysis (gDNA QC for NGS)

5.5 Peak Calling Function for Clinical Testing

Appendix A-Troubleshooting

2. Instrument not working or working abnormally

Troubleshooting steps for common instrument operational problems.