EasyManua.ls Logo

BIOS PROTOCOL 7D MII - 4. Error Messages; Malfunctions

BIOS PROTOCOL 7D MII
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4. Error Messages / Malfunctions
If an error occurs during a measurement the LCD displays the corresponding error code.
Error Possible Cause 2EMEDY
Weak signal or a sudden change in pressure
Ensure that the cuff is worn correctly and
measure again. Avoid movement or talking
WHENTHECUFFISBEINGINmATED
External disturbance (eg. if there is a cell
phone near by)
Electromagnetic interferance can cause odd
behaviour in the monitor. Move away from
the source.
Appears when there is an error during the
INmATIONPROCESS
Make sure the cuff is wraped around the
arm properly and that the air plug is properly
connected to the unit.
Abnormal Blood Pressure Rest for 5 minutes and try measurement again
In 7D Mode - Protocol was not done correctly
Delete all measurements from the memory.
Start Protocol again. Take 4 measurements a
day (2 in the morning, 2 in the evening) for 7
days straight.
Low battery Replace batteries.
If problems occur when using the device the following points should be checked, and if necessary, the
corresponding measures should be taken.
Malfunction 2EMEDY
The display remains blank when the device is
switched on.
1. Check batteries for correct polarity.
2. If using the AC adapter, ensure it is correctly
inserted.
The pressure does not rise even though the pump is
running.
Check the connection of the cuff tube and connect
properly, if necessary.
The device frequently fails to measure the blood
pressure values, or the values measured are too low
or too high.
1. Check the positioning of the cuff and cuff tension.
The cuff should be snug but not tight.
2. Measure the blood pressure again, ensuring that
you have remained motionless for a sufficient
amount of time to ensure an accurate reading.
Every measurement produces varying results
although the instrument functions normally and the
values displayed are normal.
.OTETHATBLOODPRESSUREmUCTUATESCONTINUOUSLY
therefore measurements will show some variability.
Blood pressure values measured differ from those
measured by the doctor.
Record the daily developement of the values and
consult your doctor.
.OTE)NDIVIDUALSVISITINGTHEIRDOCTORFREQUENTLY
EXPERIENCEANXIETYWHICHCANRESULTINAHIGHER
blood pressure reading than at home.
&ORASSISTANCECALLTHE")/3-EDICAL(OTLINE

Related product manuals