• Keep the batteries and charger away from open ames or sparks
and any source of ignition
• Always have good ventilation when changing batteries
• Keep children away from batteries at all times and when they
are being charged
The components of the scooter can be awkward, heavy and
difficult to remove, it is best to have assistance during the
changing of the batteries or contact an authorized Thermor service
centre representative.
Step 1. Ensure that the scooter is not being charged, the tiller is
in the most upright position and the wheels are facing
forward.
Step 2. Remove the seat (see seat removal)
Step 3. Remove the rear shroud
Step 4. Disconnect the battery cables from their terminals
Step 5. Remove the old batteries from their battery wells – set
aside
Step 6. Place the new batteries into the battery wells, with the
terminals facing towards the front of the scooter
Step 7. Connect the red cable to the positive (+) battery terminal
(red to red).
Step 8. Connect the black cable to the negative (-) battery terminal
(black to black).
Step 9. Reconnect and tighten all screws that hold the battery
terminals.
Step 10. Ensure that the battery terminal boots are covering the
battery terminals.
32
To Next Page
Loading...