Name: Biostar A320MH PRO
Brand: Biostar
Rating: 4 (1 reviews)

To Next Page

To Previous Page

12 | 2. Advanced Menu

System probe lter

This item controls whether or not the probe lter is enabled. Has no eect on parts where the

probe lter is fuse disabled.

Opons: Auto (Default) / Disabled / Enabled

Memory interleaving

This item controls fabric level memory interleaving (AUTO, none, channel, die, socket).

Opons: Auto (Default) / None / Channel / Die / Socket

Note that channel, die, and socket has requirements on memory populaons and it will be ignored if

the memory doesn’t support the selected opon.

Memory interleaving size

This item controls the memory interleaving size. The valid uzlues are AUTO, 256 bytes, 512

bytes, 1 Kbytes or 2Kbytes. This determines the starng address of the interleave (bit 8, 9, 10 or

11).

Opons: Auto (Default) / 256 Bytes / 512 Bytes / 1 KB / 2 KB

Cannel interleaving hash

This item controls whether or not the address bits are hashed during channel interleave mode.

This eld should not be used unless the interleaving is set to channel and the interleaving size is

256 or 512 bytes.

Opons: Auto (Default) / Disabled / Enabled

UMC Common Opons

Other manuals for Biostar A320MH PRO

Questions and Answers:

Need help?

Do you have a question about the Biostar A320MH PRO and is the answer not in the manual?

General