Biostar A320MH PRO Bios User Guide

BIOS Update | 3
B350GT3 & X370GT3
7. A dialog pops out aer BIOS ash is completed,
asking you to restart the system. Press the <Y> key
to restart system.
8. While the system boots up and the full screen logo shows up, press <DEL> key to enter BIOS
setup.
Aer entering the BIOS setup, please go to the <Save & Exit>, using the <Restore Defaults>
funcon to load Opmized Defaults, and select <Save Changes and Reset> to restart the
computer. Then the BIOS Update is completed.
BIOS Update Ulity (through the Internet)
1. Installing BIOS Update Ulity from the DVD Driver.
2. Please make sure the system is connected to the internet before using this funcon.
3. Launch BIOS Update Ulity and click the
“Online Update” buon on the main screen.
4. An open dialog will show up to request your
agreement to start the BIOS update. Click “Yes”
to start the online update procedure.
5. If there is a new BIOS version, the ulity will
ask you to download it. Click “Yes” to proceed.
6. Aer the download is completed, you will be
asked to program (update) the BIOS or not. Click
“Yes” to proceed.

Biostar A320MH PRO Specifications

General

Form Factor	Micro ATX
Chipset	AMD A320
Socket	AM4
Memory Slots	2 x DIMM
Max Memory	32 GB
PCIe Slots	1 x PCIe 3.0 x16, 1 x PCIe 2.0 x1
LAN	Realtek RTL8111H Gigabit LAN
Memory Speed	2667/2400/2133 MHz
Storage Interface	4 x SATA III
USB Ports	4 x USB 3.1 Gen1
Video Outputs	1 x HDMI, 1 x VGA
Audio	Realtek ALC887