To Next PageTo Next PageWhat to do if my Biostar A68N-5600 Motherboard has no power?
If there is no power in the system, the power LED does not shine, the fan of the power supply does not work, and the indicator light on the keyboard does not shine, make sure the power cable is securely plugged in. If the problem persists, replace the cable.
What to do if Biostar A68N-5600 system does not boot from hard disk drive?
If the system doesn't boot from the hard disk drive but can boot from the optical drive, check the cable running from the disk to the disk controller board, ensuring both ends are securely plugged in. Also, check the drive type in the standard CMOS setup. Backing up the hard drive is extremely important.
What to do if Biostar A68N-5600 shows “Invalid Configuration” or “CMOS Failure”?
If the screen message shows “Invalid Configuration” or “CMOS Failure,” review the system’s equipment. Make sure the correct information is in setup.
What to do if Biostar A68N-5600 system only boots from an optical drive?
If the system only boots from an optical drive, but hard disks can be read and applications can be used, back up data and application files, reformat the hard drive, and reinstall applications and data using backup disks.
How to fix Biostar Motherboard when system cannot boot after installing a second hard drive?
If the system cannot boot after installing a second hard drive, set master/slave jumpers correctly. Also, run the SETUP program and select correct drive types. Contact the drive manufacturers for compatibility with other drives.
General| Form Factor | Mini ITX |
|---|---|
| Socket Type | FM2+ |
| Chipset | AMD A68H |
| Maximum Memory | 32GB |
| Audio | Realtek ALC662 6-Channel HD Audio |
| Memory Slots | 2 x DDR3 |
| Memory Standard | DDR3 2400/2133/1866/1600/1333 |
| Expansion Slots | 1 x PCIe 2.0 x16 |
| Storage Interface | 4 x SATA III |
| USB Ports | 4 x USB 2.0 |
| LAN | Realtek RTL8111H |
| Video Outputs | HDMI, VGA |
| Power Connector | 24-pin ATX |
Safety and environmental guidelines before installing the motherboard.
Detailed technical specifications of the motherboard.
Identifies and describes the ports on the motherboard's rear panel.
Step-by-step guide for installing DDR3 memory modules.
Procedures and methods for updating the system's BIOS for improved functionality.
Common hardware and software issues and their corresponding solutions.
