A780L3B BIOS Manual
30
CPU/HT Reference Clock (MHz)
This item allows BIOS to selec t CPU Over Clock.
Optio ns: 200 (Default) / 200~600
CPU Over Voltage
This item allows you to change CPU voltage value.
Custom P-States
This item tells BIOS whether to use the setup options below this to configure the
P-States, or whether to configure the P-States automatically.
Options: Disabled (Default) / Enabled
Core FID
This item allows you to select the Ratio/Frequency of AM3 CPU.
Options: x8.0 1600MHz ~ x15.5 3100MHz (Differed by CPU)
Core DID
Options: Divided by 1 (Default) / Divided by 2 / Divided by 4 / Divided by 8 /
Divided by 16
Core VID
This function allows you to adjust the voltage of AM3 CPU.
NB FID
This item allows you to select the Frequency of NB chip.
Options: 800MHz ~ 2000MHz (Differed by CPU)
HT Link Speed
The HyperTransport link will run at this speed if it is s lower than or equal to the
system clock and the board is capable.
Options: Auto (Default) / 200MHz / 400MHz / 600MHz / 800MHz / 1GHz /
1.2GHz / 1.4GHz / 1.6GHz / 1.8GHz / 2.0GHz
HT Link Width
The HyperTransport link will run at this width.
Options: Auto (Default) / 8 Bit / 16 Bit
To Next Page
Loading...
Need help?
General
