To Next PageTo Next Page
Need help?Do you have a question about the Biostar A780L3L - BIOS and is the answer not in the manual?
General| Brand | Biostar |
|---|---|
| Model | A780L3L - BIOS |
| Category | Motherboard |
| Language | English |
Shows system information including BIOS version and build date.
Shows system memory size, VGA shard memory will be excluded.
Sets the system internal clock.
Sets the system date.
Select the type of floppy disk drive installed in your system.
Sub-menu for IDE/SATA device configuration.
Detailed options for IDE/SATA devices.
Displays CPU information detected by BIOS.
Controls virtualization technology.
Enables or disables the PowerNow power saving technology.
Enables CPU auto-transition to pop-down p-state.
Enables "Enhanced Halt State" for power saving.
Configures ITE8721 Super IO Chipset.
Controls the onboard floppy disk controller.
Selects address and interrupt for serial ports.
Sets access address for parallel port controller.
Determines how the parallel port functions.
Controls keyboard power on functionality.
Controls mouse power on functionality.
Defines system behavior after power failure.
Configures CPU and System fan control.
Controls the CPU Smart Fan function.
Shows system temp, fan speed, and voltage.
Sets the CPU shutdown temperature.
Configures power management settings.
Selects the suspend type under ACPI OS.
Enables/disables the Advanced Programmable Interrupt Controller.
Enables/disables USB resume from S3/S4.
Controls the wake on LAN (WOL) function.
Configures USB controller and device info.
Provides legacy support for USB devices.
Selects USB 2.0 controller operation mode.
Configures USB mass storage devices.
Configures PCI bus system settings.
Clears NVRAM (CMOS) data.
Controls PnP card initialization by BIOS or OS.
Controls PCI device bus holding time.
Assigns IRQ for the PCI VGA card.
Enables onboard IDE controller DMA transfers.
Displays available PCI IRQ and DMA resources.
Assigns system interrupt types for devices.
Assigns system DMA channel types for devices.
Configures PCI Express slots and features.
Sets ASPM for PCI Express devices.
Specifies the boot device priority sequence.
Sets the hard disk boot sequence.
Sets the removable drive boot sequence.
Sets the CD/DVD drive boot sequence.
Enables an abridged Power On Self-Test.
Controls POST's handling of memory errors.
Manages multi-core processor behavior.
Configures specific chipset features.
Configures Southbridge chipset settings.
Configures the HD audio device.
Configures Embedded Controller settings.
Enables the on-chip Serial ATA.
Selects the on-chip Serial ATA operation mode.
Configures Northbridge chipset settings.
Configures internal graphics device settings.
Selects UMA frame buffer size for internal graphics.
Configures PCI Express slots and features.
Configures onboard peripheral devices.
Controls the onboard LAN controller.
Enables/disables the Onboard LAN Boot ROM.
Overview of performance adjustment options.
Adjusts CPU overclocking settings.
Selects CPU Over Clock reference frequency.
Selects the Ratio/Frequency of AM3 CPU.
Adjusts the voltage of the CPU.
Sets the Core Divider.
Adjusts the voltage of the NB chip.
Selects the Frequency of NB chip.
Sets the NB Divider.
Sets the HyperTransport link speed.
Enhances stability for advanced overclocking.
Manages system clock settings.
Selects ATIG/SB Reference Clock.
Configures DRAM timing parameters.
Controls the Memory Clock mode.
Sets the Memory Clock frequency.
Regulates DRAM Timing automatically or manually.
Sets CAS Latency.
Enables or disables the 2T command.
Sets TRP timing.
Sets tR TP timing.
Sets TRAS timing.
Sets TRC timing.
Sets tWR timing.
Sets TRRD timing.
Sets tWTR timing.
Sets RFC timings.
Configures memory settings.
Improves memory performance via simultaneous access.
Controls DDR2 dual-channel function.
Remaps overlapped PCI memory.
Controls DRAM controller dual-channel mode.
Controls DRAM power down function.
Configures Error Correcting Code settings.
Selects the DRAM ECC Mode.
Enables or disables DRAM ECC.
Redirects DRAM scrub operations.
Enables or disables 4-bit ECC mode.
Sets scrub timings for various caches.
Overview of options for exiting setup.
Saves all configuration changes and exits.
Abandons changes and exits setup.
Abandons current changes, restores previous values.
Reloads BIOS with factory optimized settings.
Provides/revises supervisor and user passwords.
Sets or changes the supervisor password.
Sets or changes the user password.
Protects the IDE Hard Disk boot sector.
