To Next PageTo Next Page
Need help?Do you have a question about the Biostar N68S3PLUS - BIOS and is the answer not in the manual?
General| Brand | Biostar |
|---|---|
| Model | N68S3PLUS - BIOS |
| Category | Motherboard |
| Language | English |
Shows BIOS version, build date, and other system information.
Displays the total amount of system memory installed on the motherboard.
Allows the user to set the system's internal clock and date.
Selects the type of floppy disk drive installed in the system.
Detects and configures IDE and SATA devices connected to the system.
Enables or disables the nVidia RAID function for SATA devices.
Displays detailed CPU information and allows core setting adjustments.
Configures settings for SuperIO devices like serial and parallel ports.
Monitors system temperature, fan speed, and voltage levels.
Controls CPU and system fan speed based on temperature.
Manages system power saving features and ACPI states.
Configures USB controller modes and legacy support.
Clears the NVRAM (CMOS) data to reset BIOS settings.
Manages Plug and Play card initialization by BIOS or OS.
Controls how long a PCI device holds the PCI bus.
Configures advanced settings for PCI Express devices.
Configures various system boot options and POST behavior.
Sets the sequence of devices for system boot-up.
Manages the boot order for installed hard disk drives.
Configures the boot order for removable storage devices.
Configures the boot order for CD/DVD drives.
Configures specific settings for the North Bridge chipset.
Configures settings for the SouthBridge MCP68 chipset.
Configures Hyper Transport settings between CPU and chipset.
Allows adjustment of CPU frequency for overclocking.
Configures memory clock settings and DRAM timings.
Manages CPU performance states (P-States) and voltage.
Provides options to save, discard changes, or load defaults.
Manages supervisor and user passwords for BIOS access.
Enables virus warning for boot sector write attempts.
