To Next PageTo Next Page
Need help?Do you have a question about the Biostar TPOWER I45 - BIOS and is the answer not in the manual?
General| Brand | Biostar |
|---|---|
| Model | TPOWER I45 - BIOS |
| Category | Motherboard |
| Language | English |
Describes the purpose of the manual and the BIOS Setup utility.
Details the BIOS support for the Plug and Play specification.
Details the BIOS support for the EPA Green PC specification.
Details support for Advanced Power Management features.
Details support for Advanced Configuration and Power Interface.
Details support for the Intel PCI local bus specification.
Details support for DDR2 SDRAM.
Lists the types of Intel CPUs supported by the BIOS.
Explains how to navigate and use the BIOS setup utility.
Shows system information including BIOS version and build date.
Allows setting the system's internal clock and date.
Selects the type of floppy disk drive installed in the system.
Configures advanced CPU settings like C1E, TM Function, and SpeedStep.
Configures Super IO chipset features like serial ports.
Displays system temperature, fan speed, and voltage information.
Controls CPU and system fan speeds based on temperature.
Configures Power Management and ACPI features for system states.
Manages USB controller settings, legacy support, and modes.
Configures onboard PCI/PCI-E devices like SATA, LAN, and Boot ROM.
Configures NVRAM, Plug & Play OS, PCI Latency Timer, and IRQs.
Assigns IRQs to PCI VGA, enables/disables Palette Snooping and IDE Bus Master.
Configures boot options like Quick Boot, Logo Display, and Error Handling.
Sets the sequence for booting from Hard Disk, Removable Drives, and CD/DVD Drives.
Configures Memory Remap Feature, Memory Hole, and PEG Port settings.
Configures USB Functions, USB Port Configuration, and HDA Controller.
Provides automated or manual overclocking profiles for system performance.
Allows experienced users to customize CPU frequency, ratio, and voltages.
Adjusts DRAM timings like CL, tRP, tRCD, RAS, and tWR.
Configures PCIE, CPU, and MCH clock skew and driving control.
Manages CPU features like C1E Support, TM Function, and C-State.
Adjusts voltages for CPU, DDR, Chipset, FSB, and GTL references.
Saves all configuration changes to CMOS and exits the setup utility.
Abandons all changes made during the current session and exits.
Reloads factory default settings for system stability and optimization.
Manages supervisor and user passwords, including access levels.
Configures the timing for password checking during setup entry.
Provides warning and alarm for attempts to write to the boot sector.
Allows saving and reloading different CMOS settings for system configurations.
