To Next PageTo Next PageWhat to do if the screen message shows “Invalid Configuration” or “CMOS Failure” on Biostar TA75M?
If the Biostar Motherboard displays an “Invalid Configuration” or “CMOS Failure” message, review the system’s equipment and ensure the correct information is in the setup.
What to do if Biostar TA75M Motherboard does not boot from a hard disk drive?
If your Biostar Motherboard doesn't boot from the hard disk drive but does boot from the optical drive, check the cable running from the disk to the disk controller board, ensuring both ends are securely plugged in. Also, check the drive type in the standard CMOS setup. Backing up the hard drive is extremely important because all hard disks are capable of breaking down at any time.
What to do if Biostar TA75M Motherboard system is inoperative but keyboard lights are on?
If the Biostar Motherboard system is inoperative but the keyboard lights are on, the power indicator lights are lit, and the hard drives are running, press down firmly on both ends of the DIMM with even pressure until the module snaps into place.
How to troubleshoot no power in Biostar TA75M system?
If there is no power in the Biostar Motherboard system, and the power LED does not shine while the fan of the power supply does not work, ensure the power cable is securely plugged in, and replace the cable if necessary. Contact technical support.
General| Model | TA75M |
|---|---|
| Manufacturer | Biostar |
| Form Factor | Micro ATX |
| Socket | FM1 |
| Chipset | AMD A75 |
| Memory Slots | 2 |
| Max Memory | 16GB |
| PCI Slots | 1 |
| SATA Ports | 6 x SATA 6Gb/s |
| Audio | Realtek ALC662 6-Channel HD Audio |
| LAN | Realtek RTL8111E Gigabit LAN |
| Memory Standard | DDR3 1866/1600/1333/1066 |
| PCI Express Slots | 1 x PCIe 2.0 x16, 1 x PCIe 2.0 x1 |
| USB Ports | 4 x USB 3.0 |
| Video Outputs | 1 x HDMI, 1 x DVI, 1 x VGA |
Equipment compliance with FCC rules for digital devices.
Vendor's warranty limitations, publication rights, and copyright.
Essential precautions and environment setup before installation.
List of items included in the motherboard package.
Detailed technical specifications of motherboard components.
Identification and description of rear panel I/O ports.
Diagram and labeling of motherboard components and connectors.
Step-by-step guide for CPU installation into Socket FM1.
Details on CPU and System fan header connections and pin assignments.
Instructions for installing DDR3 memory modules into DIMM slots.
Overview of various motherboard connectors and expansion slots.
Explanation of jumper settings (open/closed).
Pin assignments and functions for the front panel connector.
Procedure for clearing CMOS settings via jumper.
Pin assignments for the serial port connector.
Pin assignments for the front panel audio header.
Pin assignment for the digital audio output connector.
Pin assignments for the Consumer IR connector.
Pin assignments for the front USB 3.0 header.
Pin assignments for front USB 2.0 headers.
Pin assignments for the printer port connector.
Description of on-board LEDs for system status and debugging.
Identification of on-board reset and power buttons.
Overview of integrating APU graphics with a discrete GPU.
System requirements and supported hardware combinations for Dual Graphics.
Step-by-step guide for setting up AMD Dual Graphics in BIOS and software.
Supported operating systems for RAID functions.
Definitions of RAID 0, RAID 1, and RAID 10 configurations.
Explanation of RAID 0 (striping) features, uses, benefits, and drawbacks.
Explanation of RAID 1 (mirroring) features, uses, benefits, and drawbacks.
Explanation of RAID 10 (striping and mirroring) features, uses, benefits, and drawbacks.
Overview of T-Series UEFI BIOS features.
Description of the O.N.E. utility for overclocking settings.
Explanation of the Self Recovery System (S.R.S.) function.
Explanation of the Smart Fan control feature in BIOS.
Detailed settings for controlling CPU fan speed based on temperature.
Steps to install the provided motherboard software.
How to start the installed motherboard utilities.
Overview of the TOverclocker utility for system enhancement.
Information section for CPU and motherboard details in TOverclocker.
Information section for memory modules in TOverclocker.
Utility for changing system clock and voltage settings.
Description of available pre-set overclocking modes.
Utility for monitoring hardware voltage, fan speed, and temperature.
Utility for enhancing energy efficiency and monitoring system status.
Explains Auto Phase, Performance, Typical, Medium, and Maxi-Energy modes for power saving.
Utility for contacting tech support with system information.
Procedure to save system information to a text file.
Procedure for backing up the current BIOS.
Procedure for updating the BIOS from a file.
Procedure for updating BIOS via the internet.
Instructions for installing drivers from the setup CD.
Steps for installing device drivers.
Steps for installing additional software from the CD.
Information on accessing the manual from the CD.
Troubleshooting steps for CPU overheating protection.
List and interpretation of AMI BIOS beep codes.
Actions to take based on POST beep codes.
Common troubleshooting scenarios and their solutions.
