To Next PageTo Next PageHow to troubleshoot no power issue on Biostar Motherboard?
If your Biostar Motherboard system shows no signs of power, such as the power light not illuminating or the fan inside the power supply not turning on, first ensure the power cable is securely plugged in. If the issue persists, try replacing the power cable. If neither of these steps resolves the problem, it is recommended to contact technical support.
What to do if Biostar TA770A2SE system is inoperative but has lights and spinning hard drive?
If your Biostar Motherboard system is inoperative but the keyboard lights are on, the power indicator lights are lit, and the hard drive is spinning, apply even pressure on both ends of the DIMM until the module snaps into place.
What to do if Biostar Motherboard only boots from optical drive?
If your Biostar Motherboard system only boots from the optical drive, but the hard disk can be read and applications used, back up your data and application files. Then, reformat the hard drive and reinstall your applications and data using backup disks.
What to do if Biostar TA770A2SE Motherboard shows “Invalid Configuration” or “CMOS Failure”?
If you see an “Invalid Configuration” or “CMOS Failure” message on your Biostar Motherboard system, review the system’s equipment and ensure that the correct information is in the setup.
General| Form Factor | ATX |
|---|---|
| Socket Type | AM2+ |
| Chipset | AMD 770 |
| Maximum Memory | 8 GB |
| SATA 3Gb/s | 4 |
| Audio | Realtek ALC662 6-Channel HD Audio |
| LAN | Realtek RTL8111C Gigabit LAN |
| Memory Slots | 4 |
| Memory Standard | DDR2 |
| Expansion Slots | 1 x PCIe x16, 2 x PCIe x1, 3 x PCI |
| Storage Interface | SATA 3Gb/s |
Step-by-step guide for installing the Central Processing Unit onto the motherboard socket.
Introduction to the O.N.E. utility for system overclocking and performance tuning.
Step-by-step guide for updating the motherboard BIOS using the BIO-Flasher utility.
Using the AUTO overclock feature and selecting desired engine options.
Testing overclocks, resetting defaults, and manual clock adjustments.
Information on updating BIOS for Award and AMI systems.
Steps to backup the current motherboard BIOS before updating.
