EasyManuals Logo

Biostar A780L3L User Manual

Biostar A780L3L
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #33 background imageLoading...
Page #33 background image
A780L3L BIOS Manual
32
NB VID
This function allows you to adjust the voltage of NB chip.
NB FID
This item allows you to select the Frequency of NB chip.
Options: 800MHz ~ 7000MHz (Differed by CPU)
NB DID
This is the NB Div ider.
Options: Divided by 1 (Default) / Divided by 2
HT Link Speed
The HyperTransport link will run at this speed if it is slo wer than or equal to the
system clock and the board is capable.
Options: Auto (Default) / 200MHz / 400MHz / 600MHz / 800MHz / 1GHz /
1.2GHz / 1.4GHz / 1.6GHz / 1.8GHz / 2.0GHz
HT Link Width
The HyperTransport link will run at this width.
Options: Auto (Default) / 8 Bit / 16 Bit
Advanced Clock Calibration
Advanced Clock Calibration (ACC) is an enhanced technology for overc locking,
needing support from both chipset and CPU. When enabled, it will improve the
stability of advanced overclocking greatly.
Options: Disabled (Default) / Auto / All Cores / Per Core
Core Leveling
This item allows you to activate Core Leveling function.
Options: Auto(Default) / Auto

Other manuals for Biostar A780L3L

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Biostar A780L3L and is the answer not in the manual?

Biostar A780L3L Specifications

General IconGeneral
BrandBiostar
ModelA780L3L
CategoryMotherboard
LanguageEnglish

Related product manuals