Need help?Do you have a question about the biosystems MultiPro and is the answer not in the manual?
Introduces the automatic calibration procedures for the detector.
Step-by-step guide for powering on the MultiPro detector.
Explains how to perform a quick accuracy verification test.
Details the procedure for calibrating sensors to a zero gas environment.
Troubleshooting for span calibration errors with toxic/LEL sensors.
Troubleshooting for span calibration errors with oxygen sensors.
Information on battery types and removal procedures.
Introduces the automatic calibration procedures for the detector.
Step-by-step guide for powering on the MultiPro detector.
Explains how to perform a quick accuracy verification test.
Details the procedure for calibrating sensors to a zero gas environment.
Troubleshooting for span calibration errors with toxic/LEL sensors.
Troubleshooting for span calibration errors with oxygen sensors.
Information on battery types and removal procedures.
General| Display | LCD |
|---|---|
| Vibrating Alarm | Yes |
| Gas Detected | Oxygen (O2), Hydrogen Sulfide (H2S), Carbon Monoxide (CO) |
| Sensor Type | Electrochemical |
| Audible Alarm | Yes |
| Power Supply | Rechargeable lithium battery |
| Operating Temperature | -20°C to 50°C |
| Output | Bluetooth, USB |
To Next Page
