Do you have a question about the Bird-X YARDGARD and is the answer not in the manual?
battery capacity | 4 x 1.5V "C" batteries |
---|---|
AC adapter voltage | 120 V |
working current | <200 mA |
motion sensor activation range | up to 35 x 70 feet |
---|---|
frequency range | 15 kHz - 25 kHz |
effective range | up to 4, 000 square feet |
output sound pressure | 90 dB @ 1 meter |
---|
Survey pests, their entry, exit, and feeding habits to understand their behavior.
Inspect property to identify attractants for pests and assess neighboring conditions.
Clean the area of pest evidence and residual scent, using caution during removal.
Periodically repeat cleaning and vary unit settings for maximum effectiveness.
Install the YardGard before pest season begins to discourage pests effectively.
Combine YardGard with other devices for synergistic effects and greater effectiveness.
Consider where pests will go when leaving current areas and cover those spots.
Overview of YardGard unit features including operation switch, frequency, and sensitivity dials.
Set the unit's operation switch to the desired mode (MS AC/Battery or CONT AC Only).
Turn the frequency dial to select the desired pest range for deterrence.
Turn the sensitivity dial to adjust the motion sensor's detection range.
Plug the AC adapter into the unit and a standard outlet, protecting outdoor connections.
Install four 'C' batteries into the unit as indicated for operation.
Understand the unit's coverage area, pattern, and factors affecting its range.
Mount the unit on a wall or post, pointing the speaker towards the desired coverage area.
Check power settings, pest management program, dial settings, and sounds for issues.
Avoid prolonged exposure to the unit at close range due to high frequencies.
Do not place near water, aim at neighbors, or use on caged animals; use on own property.
YardGard is warranted against defects for six months from the shipping date.
Combine YardGard with other Bird-X products for maximized pest control effectiveness.
Details on power, working current, motion sensor, frequency range, and coverage.