Bison Pumps 1900 - Page 15

15
See “Other Accessories” below and Detail K for ordering details.
Hardware Maintenance – With proper care, it is unlikely that you will need to replace the hardware
used to assemble your Model 1900 Stainless Steel Pitcher Pump. However, Bison Pumps offers the
hardware separately under “Other Maintenance Items.”
Other Maintenance Items
Part Number
Description
Quantity
50-001-0-03-07
Handle Rubber Bumper
1
05-001-6-04-01
Bronze Bushing
1
50-001-0-06-00
Hose Bibb Cap
1
50-001-0-03-01
Handle Assembly
1
04-000-1-60-15
Drain Valve Spring
1
50-001-0-21-01
Drain Pin Seat Tool
1
Other Accessories
Part Number
Description
Quantity
55-001-0-03-01
Pressurizing Kit (Check Valve, Gauge & Hose)
1
55-001-0-01-01
Check Valve with Pressure Gauge
1
55-001-0-02-00
Potable Water Hose, 5/8” x 10’ with Stainless Steel Fittings
1
04-029-0-74-01
Reducing Bushing, Stainless Steel 2” to 1 ¼” NPT
1
04-029-0-74-02
Reducing Bushing, Stainless Steel 2” to 1” NPT
1
Contact
For questions about your product, you can email technical support at
sales@BisonPumps.com or call our toll-free number 1-800-339-2601.
Bison Pumps
www.bisonpumps.com
Model 1900 Owner's Manual Rev C
15 of 31