Installation Options
Warning – You must comply with your local plumbing code.
Contact a certified plumber if you have questions about proper
plumbing codes in your area.
Before you begin the installation of your new Bison Pump, open the box and inspect the contents. Verify
that you have received everything that you ordered. If there is anything that is missing or doesn’t
match, please call Bison Pumps immediately to correct the situation (1-800-339-2601).
Record your Bison Model 1900 Pump Serial Number on the front page of this manual.
Location – Before deciding on the location of your Bison Pump, you should consider whether you intend
to use it to pressurize your home water system. If you do, then you should consider the location of your
pressure tank drain valve or other access location (i.e., yard hydrant or outside faucet) in relation to the
pump’s location. Our Optional Pressurizing Kit (55-001-0-03-01) or Check Valve with pressure gauge
(55-001-0-01-01) would have to be installed onto the spout of the pump and a hose ran from the
pressurizing kit to the access location for your pump to pressurize the water system. Be certain that you
have an accessible path from the pump spout to the water system access point and clearance for
handle functionality. See “How to Pressurize a Water System” and Detail H for more information.
Read the instructions completely before beginning the installation process.
Model 1900 Owner's Manual Rev C
To Next Page
Loading...
