5
INSTALLATION OVERVIEW
In order to have the safest, most enjoyable and longest use of your basketball system,
please note and heed the following:
1) Prior to goal assembly, call utility services for location of
underground utility lines before you dig.
2) Immediately unpack and inspect all components. Cross check
against bill of materials.
3) Assembly is a two step process.
STEP 1
Day 1: Complete Anchor System Installation
Day 2: Allow concrete to cure.
Day 3: Allow concrete to cure.
Day 4: Allow concrete to cure.
STEP 2
Day 5: Complete assembly
REV. 10/10/17
To Next Page
Loading...