LISTS OF INSPECTION
POST-SALES INSPECTION
It’s advised that the following items are constantly checked during first hours of operation.
■ Fully check the machinery and certify there are no damaged parts. Repair or change if
necessary. AII guards shall be in place.
■ Check there are no loose or missing screws.
■ If possible, operate the rear blade to verify its proper operation.
■ Check the operator's manual in full with your client and highlight importance of a regular and
proper lubrication as well as safety precautions.
Inspection Date____________ Name and Signature___________________________
MORNING OPERATION INSPECTION
Lube all points in need of daily lubrication and those that require lubrication at a recommended
time.
■ Ensure all screws are complete and parts tighten.
■ Check that mounting components are safe.
■ Ensure that all hydraulic connections are properly tightened.
SEASONAL INSPECTION
■ Check general state of rear blade (normal wear and tear, no bumps, no leaks in hoses, etc.)
■ Ensure that proper lubrication has been made.
■ With rear blade in operation, check operation of moving parts.
■ Check any failure signal of operation and check there is no unusual vibration or noise.
05
To Next Page
Loading...