PRACTICE SAFE MAINTENANCE
SAFETY RULES
Understand service procedure before doing work.
Keep área clean and dry.
Never lubricate, service, or adjust machine while it
is moving. Keep hands, feet, and clothing from
power-driven parts. Disengage all power and
operate controls to relieve pressure. Stop the
engine, and remove the key. Allow machine to cool
down.
Securely support any machine elements that must
be raised for service work.
Keep all parts in good condition and properly
installed. Fix damage immediately. Replace worn or
broken parts. Remove any buildup of grease, oil, or
dirt.
Disconnect battery ground cable (-) before making
adjustments on electrical systems or welding on
machine.
USE SAFETY LIGHTS AND ACCESSORIES
Slow vehicles, tractors, dragged or suspended
equipment may present a risk to be transported or
towed by road and be hard to see, especially at
night. Avoid injury or death which may result from a
collision with other vehicles.
We recommend using lights and safety accessories
when driving on public roads.
To improve visibility, use all the lights that the tractor
has. Installing additional rotating warning lights is
recommended. Verify that the pointing devices are
in good condition.
Immediately replace safety accessories, and signal-
ing devices if lost or damaged.
11
SAFETY RULES
To Next Page
Loading...