Loosen the regulating handle, choose suitable hole, adjust the height of handle bar to a man
s waist, and screw the regulating handle
2. Adjust depth of the rotary tillage
By adjusting the height of speed control rod, control the depth of rotary tiller, shift down,
depth increase; shift up, depth decrease.
3. Start the power tiller
Put the tiller in neutral gear position , press down handle bar of the emergency power cut off
devices, then start the machinery according to this instruction.
4. Adjust the clutch
Caution: reduce the speed of engine before using clutch.
By adjusting the “separate” or “join” of clutch, to control the output of engine power.
Grip the clutch, clutch join together, the engine power transport to the power tiller, rotary
blazes begin running. (see picture 7)
Confirm the tensity of clutch cable, 4-8mm can be the general degree, out of the scope, you
have to loose locknut for adjustment, and tighten up. (see picture 9)
Italia Star Com Due S.R.L.
To Next Page
Loading...
