How to fix a Bissell Vacuum Cleaner that won't turn on?
If your Bissell Vacuum Cleaner won’t turn on, the possible causes include: * The power cord may not be plugged in, so check the electrical plug. * A fuse may be blown, or a breaker tripped; check and replace the fuse or reset the breaker.
What to do if my Bissell 1816 tool won't pick up?
If the tool on your Bissell Vacuum Cleaner isn’t picking up, it could be due to several reasons: * There might be a crack or hole in the hose; check the hose and replace it if needed. * There could be a clog in the vacuum; follow the instructions for clearing clogs. * The dirt tank may be full or not installed properly; empty the dirt tank and ensure it is correctly positioned and locked in place. * The filters might be dirty; check and clean or replace the pre-motor and post-motor filters.
Why is dirt escaping from my Bissell 1816?
If you see dirt escaping from your Bissell Vacuum Cleaner, it might be because: * The dirt tank is full; empty the dirt tank. * The filters are missing or installed incorrectly; check the pre-motor and post-motor filters to ensure they are installed correctly.
How to make my Bissell 1816 easier to push?
If your Bissell Vacuum Cleaner is difficult to push, it may be due to incorrect height adjustment. Adjust the powerfoot to the correct height setting.
General| Model | 1816 |
|---|---|
| Power Source | Corded Electric |
| Voltage | 120V |
| Cord Length | 25 feet |
| Type | Upright |
| Color | Blue |
| Included Tools | Crevice Tool |
| Filter Type | Washable Filter |
| Surface Type | Carpet |
Key warnings to reduce risk of fire, electric shock, or injury during operation.
Details on the polarized plug and its correct usage for electrical safety.
List of items included in the vacuum cleaner packaging for initial setup.
Step-by-step instructions for assembling the BISSELL CleanView vacuum cleaner.
Instructions for securely attaching the vacuum cleaner handle to the main body.
Guide for connecting the vacuum hose, clips, and various cleaning tools.
How to operate the power switch and adjust handle for different cleaning modes.
Instructions for adjusting vacuum height settings for various floor types.
How to engage or disengage the rotating brush for different floor surfaces.
Methods for moving the vacuum cleaner between rooms or locations.
Understanding the indicator for reduced airflow due to filters or clogs.
Guide for using crevice tool, dusting brush, extension wand, and TurboBrush tool.
Instructions on how to properly empty the vacuum's dirt collection tank.
Steps for cleaning the pre-motor filter and inner cyclone assembly.
Procedure for replacing the post-motor filter for optimal air filtration.
How to inspect and clean the brush roll and drive belt for wear and debris.
Instructions for replacing the vacuum cleaner's drive belt.
Troubleshooting steps for identifying and removing clogs in the vacuum system.
Common causes and remedies for the vacuum cleaner not powering on.
Solutions for low suction or poor dirt pickup issues.
Troubleshooting steps for attachments failing to pick up dirt.
Causes and solutions for resistance when pushing the vacuum.
Addressing issues where dirt is escaping the vacuum cleaner.
List of part numbers and names for replaceable vacuum components.
List of optional accessories for enhanced vacuum cleaning capabilities.
Details of the product's limited three-year warranty coverage and terms.
Information on how to obtain service, repairs, or warranty assistance.
Contact details and website for product registration, support, and warranty inquiries.
To Next Page