EasyManua.ls Logo

Bissell CLEANVIEW 1813 Series - User Manual

Bissell CLEANVIEW 1813 Series
12 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
CLEANVIEW
®
Vacuum
___________
USER GUIDE
1813, 1823, 1825 SERIES
More of a video
person? Look for this
icon and go online
for an instructional
how-to video at
www.BISSELL.com

Table of Contents

Questions and Answers

  • E
    Eileen JonesJul 29, 2025
    Why is my Bissell CLEANVIEW 1813 not picking up dirt?
    • V
      Victor DownsJul 29, 2025
      If your Bissell Vacuum Cleaner isn't picking up dirt, there are several potential causes. First, make sure the powerfoot is adjusted to the correct height setting. Ensure the hose is firmly attached to the suction opening. Check the hose for cracks or holes and replace it if necessary. Empty the dirt tank if it's full. Also, make sure the dirt tank or upper tank is correctly positioned and locked in place. Check and clean or replace the pre-motor and post-motor filters. Finally, check for clogs in the inner tank, hose, and foot/lower hose.
  • M
    Mary PhillipsAug 4, 2025
    How to fix a Bissell Vacuum Cleaner that won't turn on?
    • G
      Gary HenryAug 4, 2025
      If your Bissell Vacuum Cleaner won’t turn on, start by checking the electrical plug to ensure it's properly plugged in. Also, check the fuse or reset the breaker, replacing the fuse if necessary.
  • J
    John KirkAug 11, 2025
    What to do if my Bissell CLEANVIEW 1813 Vacuum Cleaner tool won't pick up?
    • C
      Charles WoodardAug 11, 2025
      If the tool on your Bissell Vacuum Cleaner isn’t picking up, the dirt tank may be full, so empty it. The dirt tank or upper tank may not be installed properly, so position it correctly and lock it in place. Also, the filters may be dirty, so check and clean or replace the pre-motor and post-motor filters. Check the hose for cracks or holes, replacing it if needed. Finally, inspect for any debris build-up or clogs in the inner tank, hose and foot/lower hose.
  • A
    aaronmcdonaldAug 16, 2025
    Why is dirt escaping from my Bissell Vacuum Cleaner?
    • J
      jamesmarkAug 16, 2025
      If you see dirt escaping from your Bissell Vacuum Cleaner, the dirt tank might be full; empty it. Also, check the pre-motor and post-motor filters to ensure they are installed correctly.
  • K
    Kellie GregoryAug 22, 2025
    How to make my Bissell Vacuum Cleaner easier to push?
    • A
      Ashley DelgadoAug 22, 2025
      If your Bissell Vacuum Cleaner is difficult to push, adjust the powerfoot to the correct height setting.

Summary

IMPORTANT SAFETY INSTRUCTIONS

General Safety Warnings

Provides essential safety precautions to prevent fire, electric shock, and injury during use.

Polarized Plug Safety

Explains the polarized plug and its proper use to reduce electric shock risk.

Whats In The Box?

Product View

Assembly Guide

Operations and Settings

Maintenance: Clean Dirt Tank

Maintenance: Filters

Pre-Motor Filter Care

Instructions for cleaning and drying the pre-motor filter to maintain vacuum performance.

Post-Motor Filter Care

Guidance on cleaning or replacing the post-motor filter for optimal air filtration.

Maintenance: Brush & Belt

Maintenance: TurboBrush Tool

Troubleshooting

Warranty and Service

Limited Warranty Details

Outlines the terms, duration, and coverage of the limited three-year warranty.

Service Contact Information

Provides contact details for customer support, repairs, and authorized service centers.

Product Registration & Resources

Bissell CLEANVIEW 1813 Series Specifications

General IconGeneral
Model Number1813 Series
Cord Length25 feet
Product TypeUpright Vacuum
Power SourceElectric
Special FeaturesMulti-Cyclonic Suction, OnePass Technology
Included AccessoriesExtension Wand, Crevice Tool
Surface RecommendationCarpet, Hard Floors
FiltrationMulti-Level Filtration

Related product manuals