EasyManua.ls Logo

Bissell 3748 - User Manual

Bissell 3748
20 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Product Overview
1. Upper Handle
2. Spray Trigger
3. Clean Water Tank
4. Carry Handle
5. Dirty Water Tank
6. Accessory Hose Door
1
3
4
5
6
2
Meet your new BISSELL® product!
Go online for a comprehensive walkthrough of your new purchase,
including videos, tips, support, and more. Want to get started
right away? This guide has all the information you need to set up
your new product. Let’s take a look…
Important Safety Instructions ................................ 2
What’s in the Box? ......................................................... 3
Assembly .............................................................................. 3
Filling the Clean Water Tank....................................4
Cleaning Carpets and Area Rugs ........................ 5
Emptying the Dirty Water Tank ............................6
Troubleshooting ............................................................... 9
Warranty ...............................................................................9
TURBOCLEAN™ PET XL 3738, 3746
POWERFORCE™ PET XL 3748
UPRIGHT CARPET & UPHOLSTERY CLEANER

Table of Contents

Questions and Answers

  • T
    taylorbrownAug 10, 2025
    Why is my Bissell 3748 Vacuum Cleaner losing suction power?
    • J
      Jeffrey PerryAug 10, 2025
      Loss of suction power in your Bissell Vacuum Cleaner may occur if the tanks are not seated properly. Ensure both tanks are correctly reseated. Another cause might be a full dirty water tank; empty it. Also, check the rubber tab on the dirty water tank and press firmly to seal it tightly. Make sure the accessory hose door is closed and locked, and that the nozzle is correctly installed; try removing and reinstalling it.
  • C
    Courtney Cooper MDAug 18, 2025
    How to fix reduced or no spray in Bissell 3748 Vacuum Cleaner?
    • R
      reginabaileyAug 18, 2025
      If your Bissell Vacuum Cleaner has reduced spray or no spray, the clean water tank might be empty. Refill it. Also, the clean water tank may not be seated completely, so turn the power off, remove, and reseat the tank. In hose cleaning mode, the pump may have lost prime. To resolve this, hold the end of the hose below the water level in the tank to prime it.
  • S
    Steven BrownAug 26, 2025
    What to do if there is no spray through hose & tool of Bissell 3748 Vacuum Cleaner?
    • T
      taylorjorgeAug 26, 2025
      If there is no spray through the hose and tool of your Bissell Vacuum Cleaner, the hose to the machine may not be primed. Turn off and unplug the machine, remove the nozzle from the foot, insert a pen in the black cylinder next to the screw, wait for water bubbles, remove the pen, and then reassemble the nozzle and hose.
  • V
    Vicki LawsonSep 1, 2025
    Why is the dirty water tank leaking on my Bissell 3748 Vacuum Cleaner?
    • M
      Michael MorrisSep 1, 2025
      If your Bissell Vacuum Cleaner's dirty water tank is leaking, the tank ring may not be installed properly. Remove the tank, then remove and reinstall the tank ring to ensure a proper fit.

Summary

Important Safety Instructions

Grounding Instructions

Details proper electrical grounding procedures for safe appliance operation.

Important Information

Provides a key operational tip regarding motorized brush rolls and machine use.

Whats in the Box?

Assembly

Filling the Clean Water Tank

Using the Easy Fill System

Specific method for filling with antibacterial formula using the easy fill system.

Cleaning Carpets and Area Rugs

Emptying the Dirty Water Tank

After-Cleaning Care

Replacing the Belt & Brush Roll

Troubleshooting

Warranty

Bissell 3748 Specifications

General IconGeneral
BrandBissell
Model3748
CategoryVacuum Cleaner
LanguageEnglish

Related product manuals