Why is there reduced spray or no spray from my Bissell CLEANVIEW POWERBRUSH 37E3G?
- CChristopher MasseyAug 4, 2025
Several factors can cause reduced or no spray. The bladder may be empty, so refill it with clean, hot tap water after turning the power switch OFF. The 2-in-1 tank may not be seated correctly; turn the power switch OFF, then remove and reseat the tank. The pump may have lost its prime; turn the power switch OFF, wait one minute, then turn it back ON and depress the spray trigger. Lastly, the pump belt may be broken. If this is the case, press the power pedal off, unplug the unit, and follow the pump belt replacement instructions.