Why my Bissell CLEANVIEW SWIVEL PET 2316 Vacuum Cleaner won’t turn ON?
If your Bissell Vacuum Cleaner won’t turn on, there are a couple of things to check. First, make sure the power cord is properly plugged into the electrical outlet. If it is, check your fuse or breaker. A blown fuse will need to be replaced, and a tripped breaker will need to be reset.
Why Bissell CLEANVIEW SWIVEL PET 2316 Vacuum Cleaner won’t pick up dirt?
If your Bissell Vacuum Cleaner isn't picking up dirt, several factors could be the cause: * The height adjustment may be incorrect, so adjust the powerfoot to the correct height setting. * The hose might not be properly attached to the suction opening; firmly push the hose wand into the hose wand base. * There could be a crack or hole in the hose, which would require a replacement. * The dirt tank might be full, so empty the dirt tank. * The dirt tank or upper tank might not be installed correctly; position correctly and lock in place. * The filters may be dirty; check, clean, or replace the pre-motor and post-motor filters.
What to do if my Bissell CLEANVIEW SWIVEL PET 2316 tool won’t pick up?
If the tool on your Bissell Vacuum Cleaner isn't picking up, start by checking these potential issues: * A crack or hole in the hose could be the culprit, requiring a hose replacement. * The dirt tank might be full, so empty it. * The dirt tank or upper tank may not be installed properly; make sure to position it correctly and lock it in place. * Dirty filters can also cause this issue; check, clean, or replace the pre-motor and post-motor filters.
Why is dirt escaping from my Bissell CLEANVIEW SWIVEL PET 2316 Vacuum Cleaner?
If you see dirt escaping from your Bissell Vacuum Cleaner, there are a couple of possible reasons. The dirt tank might be full, so you should empty it. Also, check the pre-motor and post-motor filters to ensure they are installed correctly.
How to make Bissell CLEANVIEW SWIVEL PET 2316 easier to push?
If your Bissell Vacuum Cleaner is difficult to push, the height adjustment may be incorrect. Try adjusting the powerfoot to the correct height setting.
General| Type | Upright |
|---|---|
| Swivel Steering | Yes |
| Cord Length | 27 feet |
| Dirt Cup Capacity | 1.0 liter |
| Filtration | Multi-Level Filtration |
| Pet Hair Tool | Yes |
| Cleaning Path Width | 13.5 inches |
| Model Number | 2316 |
| Voltage | 120V |
| Surface Type | Carpet |
| Included Tools | Crevice Tool |
Instructions for cleaning the pre-motor filter. Ensure it is completely dry before replacing.
Steps to disassemble, clean, and reassemble the TurboEraser tool, including brush roll and belt.
Guide on how to unscrew the bottom cover, remove and replace the brush roll and belt.
Instructions on how to remove clogs from the hose, foot hose, and air passageway.
Details on the limited three-year warranty, its coverage, exclusions, and legal rights.
Information on obtaining service, contacting BISSELL, and authorized service representatives.
Benefits of registering your product, including rewards, faster service, and alerts.
Guidance on where to find and purchase replacement parts and supplies for your vacuum.
To Next Page
