To Next PageTo Next PageWhy is my Bissell CROSSWAVE X7 CORDLESS PET PRO leaking?
If your Bissell Steam Cleaner is leaking, remove the clean water tank from the machine and inspect it and its lid for any damage. Also, remove the dirty water tank and inspect it for damage as well. Another potential cause of leaking is a full dirty water tank, so make sure to empty it.
Why is my Bissell Steam Cleaner leaving streaks or losing suction?
If your Bissell Steam Cleaner is leaving streaks or has lost suction, several factors could be the cause. First, ensure the brush roll window is correctly latched; if not, reinstall it. Second, check for clogs in the debris channel located in the foot of the device and clear any obstructions with a paper towel. Third, examine the filter for debris; if clogged or wet, remove any debris, then clean and dry the filter. Finally, a dirty brush roll can also cause these issues, so make sure to clean and dry it thoroughly.
What to do if my Bissell Steam Cleaner is not spraying?
If your Bissell Steam Cleaner isn't spraying, there are several things to check. First, ensure the clean water tank is filled. If it is, make sure it's properly seated in the machine. Also, check that the brush roll window is correctly latched. Finally, remember to hold the solution spray trigger continuously while you are using the machine to ensure continuous spray.
What does it mean when the battery indicator on my Bissell CROSSWAVE X7 CORDLESS PET PRO is blinking?
If the battery indicator on your Bissell Steam Cleaner's digital display is continuously blinking one LED light, it means the battery is too low to run the self-cleaning cycle. To resolve this, charge the machine for 30 minutes before starting the self-cleaning cycle.
What to do if Bissell CROSSWAVE X7 CORDLESS PET PRO beeps, WiFi icon flashes, but there is no connection?
If your Bissell Steam Cleaner is beeping and the WiFi icon is flashing but there's no connection, the CrossWave may have a bad QR code. Try entering the QR code details manually.
General| Power Source | Cordless |
|---|---|
| Battery Type | Lithium-Ion |
| Charge Time | 4 hours |
| Run Time | 30 minutes |
| Usage | Multi-surface cleaning |
| Cleaning Functions | Vacuum and Wash |
| Surface Type | Area Rugs, Hard Floors |
| Special Features | LED Headlights |
| Included Accessories | Multi-Surface Brush Roll, Storage Tray |
Access a comprehensive online guide for setup, usage, maintenance, tips, and troubleshooting.
Covers essential warnings for safe operation, including usage, handling, and environment.
Details on safe handling and charging of the appliance's battery pack.
Key notes regarding motorized brush roll, freezing, and open-source licenses.
Lists standard accessories that should be included with your purchase.
Identifies key components and parts of the CrossWave® X7 Cordless Pet Pro.
Explains the meaning of various icons and indicators on the machine's display.
Step-by-step guide to download, install, and connect your machine to the BISSELL Connect app.
Instructions for resetting and disabling the machine's WiFi connection.
Instructions for assembling the handle into the main body of the machine.
Guide on how to charge the machine's battery for optimal runtime.
Guidance on selecting brush rolls and formulas for multiple surfaces, wood, and area rugs.
Recommendations for formulas and brush rolls tailored for homes with pets.
Advice on cleaning hard floors and sensitive surfaces with appropriate products.
Instructions on powering on, selecting modes, and using the solution spray trigger.
Details on Hard Floor Mode, Area Rug Mode, and TURBO PET™ Mode.
Steps to remove, clean, and re-install the brush roll and window.
Instructions for cleaning the dirty water tank and its filter screen.
Guidance on ensuring all cleaned parts are properly dried before reassembly.
Steps to clean the machine's foot and suction hose.
Procedure for correctly placing and locking the brush roll and window.
Instructions for wiping down the docking station and charging contacts.
Solutions for problems like no beeping noise or flashing WiFi icon.
Troubleshooting for streaking, loss of suction, and no spray.
Fixes for leaking issues, battery indicator problems, and machine not charging.
