Why is my Bissell POWERFRESH DELUXE not producing steam?
If your Bissell Steam Cleaner is producing reduced steam or no steam, first, refill the water tank. Next, ensure that you have selected a steam level by pushing the steam level button. Also, check that the scented disc tray is fully inserted into the unit until it's flush. Finally, make sure the STEAM ON/OFF button is pressed, and the Ready Light is illuminated.
What to do if my Bissell Steam Cleaner is leaking?
If your Bissell Steam Cleaner is leaking, it may be because the mop pad is too wet. Remove the wet mop pad and replace it with a dry one.
How to stop Bissell POWERFRESH DELUXE from streaking?
If your Bissell Steam Cleaner is leaving streaks, it could be due to a dirty mop pad. Remove the pad and wash it according to the instructions before using it again. Also, if you have waxed or oiled floors, steam products may decrease glossiness. Refer to the wax or polish manufacturer for guidance. If you don’t wax or polish your floors, check the floor care instructions from your flooring manufacturer.
Why does my Bissell Steam Cleaner make a knocking noise?
If your Bissell Steam Cleaner is making a knocking noise, especially during first use or when the water tank is empty, fill the water tank. The knocking sound should diminish after a few seconds.
General| Power Source | Corded |
|---|---|
| Heater | Yes |
| Tank Capacity | 16 oz |
| Surface Type | Hard Floors |
| Weight | 6.2 lbs |
| Power | 1500 watts |
| Cord Length | 25 ft |
| Steam Ready Time | 30 seconds |
| Product Type | Steam Mop |
| Steam Control | Digital |
| Special Features | Swivel Steering |
| Power Rating | 1500 W |
| Steam Settings | Low/High |
Key safety precautions and warnings for using the steam mop.
Guide to selecting and using different steam levels for cleaning.
Detailed guide on how to clean various hard floor surfaces.
Common issues and their corresponding solutions for the steam mop.
To Next Page