Bissell POWERFRESH 2075 series User Manual

Quick Start Usage Instructions
WARNING
Refer to the enclosed user guide for complete
instructions and important safety notices.
POWERFRESH
®
SLIM STEAM MOP
QUICK START GUIDE
2075 SERIES
161-2081 05/17 RevF
1. Locate the clean water
tank on the front of
the Handheld Pod and
fill it with distilled or
demineralized water
using the water cup.
2. Insert the Extension
Wand into the Mop Pad
Foot until you hear a
click. Then, insert the
Handheld Pod into the
top of the Extension
Wand until you hear it
click into place.
3. Plug machine in and wait
until the STEAM READY
light turns to a solid light.
This could take up to a
minute for it to be ready
for use.
Press PAUSE when you
want to stop the machine
from steaming.
NOTE: Upon first use of
the steam mop or first
use after refilling the
water tank, the pump may
make a “knocking” sound,
indicating it is priming the
machine.
4. Depending on cleaning
needs, select HI STEAM
or LOW STEAM.
HI STEAM is for cleaning
durable floors or sticky
messes.
LOW STEAM is for
delicate floors or for
light, everyday cleaning.
Press PAUSE when you
want to stop the machine
from steaming.
5. Step on the side of
the foot to recline the
body of the machine.
Then, push the trigger
underneath the handle
of the Handheld Pod to
release steam and begin
cleaning.
click
PAUSE
HI Steam
LOW Steam
PAUSE
HI STEAM
LOW STEAM
WARNING
End of Extension Wand and end of Handheld Pod will still be hot after pressing
the PAUSE button. Before changing from mopping to the handheld feature or
disconnecting a tool from the handheld pod or extension wand, make certain
steam is no longer coming from the nozzle or wait until cool before removing.

Bissell POWERFRESH 2075 series Specifications

General

Type	Steam Mop
Power	1500 watts
Heating Time	30 seconds
Water Tank Capacity	16 oz
Steam Control	Yes
Swivel Head	Yes
Model	2075 Series
Accessories	Carpet glider

Summary

Quick Start Usage Instructions

Initial Setup and Assembly

Fill water tank, assemble mop components, and wait for steam readiness.

Steam Operation Modes

Select between HI STEAM for tough messes and LOW STEAM for delicate surfaces.

Cleaning Process

Use swivel steering and trigger to release steam for cleaning.

Important Safety Precautions

Be aware of hot parts after use and refer to the user guide for safety.

Getting the Best Clean

Multi-Surface Cleaning Methods

Use the extension wand for hard-to-reach areas and the handheld pod for surfaces above floors.

Effective Swivel Steering

Utilize swivel steering for cleaning tight spaces like baseboards and around furniture.

Accessory Management

Attach the tool box to the handheld pod for convenient storage and transport.

Cleaning Tips and Tricks

Vacuum/sweep first, use wall mount, check water level, and use scrubby pads for tough messes.