To Next PageTo Next PageWhy does my Bissell Vacuum Cleaner have low suction?
Low suction in your Bissell Vacuum Cleaner can occur due to several reasons. The dirt tank might be full and needs emptying. Ensure the dirt tank is correctly installed and firmly snapped into place. Also, check that the foot is fully inserted into the body of the machine. The filters may need cleaning, or there could be a clog or obstruction in the foot area that needs to be removed.
Why is my Bissell FEATHERWEIGHT CORDLESS XRT Vacuum Cleaner brush roll not turning?
If the brush roll on your Bissell Vacuum Cleaner isn't turning, it might be jammed. Remove any obstructions that you find. Also, try turning the machine OFF to clean the Brush Roll and Brush Roll endcap area. The LED light will reset when the machine is turned ON.
What to do if my Bissell FEATHERWEIGHT CORDLESS XRT Vacuum Cleaner won’t charge?
If your Bissell Vacuum Cleaner isn’t charging, make sure you are using only the charger that came with the machine. Also, ensure the hand vacuum is properly installed in place; try removing and reinstalling it.
Why is visible dirt escaping from my Bissell FEATHERWEIGHT CORDLESS XRT?
If you see dirt escaping from your Bissell Vacuum Cleaner, it could be because the dirt tank is full of debris, so you should empty it. Another possibility is that the filter assembly is either missing or installed incorrectly, so check the filter for correct installation. Finally, make sure the dirt tank is correctly positioned and snapped firmly into place.
What to do if Bissell FEATHERWEIGHT CORDLESS XRT Vacuum Cleaner won’t turn on and LED light is solid red?
If your Bissell Vacuum Cleaner won’t turn on and the LED light is solid red, it indicates that the Brush Roll is stalled by debris. Turn the machine OFF and clear any debris from the Brush Roll and Brush Roll endcap area. The LED light will reset when the machine is turned ON.
General| Brand | Bissell |
|---|---|
| Model | FEATHERWEIGHT CORDLESS XRT |
| Category | Vacuum Cleaner |
| Language | English |
Key precautions for safe operation, including avoiding wet surfaces, misuse as a toy, and handling damaged cords or plugs.
