Bissell CrossWave Cordless Max 2554 Series User Manual (English)

Other manuals for Bissell CrossWave Cordless Max 2554 Series

Manual12 pages

Quick Start Guide12 pages

Questions and Answers:

M
michelle40Jul 28, 2025
Why is my Bissell Vacuum Cleaner losing suction power?
- B
  bskinnerJul 28, 2025
  Loss of suction power in your Bissell Vacuum Cleaner can occur due to several reasons. First, ensure that the Brush Roll Window is correctly latched in place; if not, reinstall it. Second, the debris channel in the foot might be clogged; clean it using a paper towel. Finally, a filter clogged with debris can also cause this issue. Remove the filter from the top of the Dirty Water Tank, clear any debris from the filter screen, and clean the filter thoroughly.
K
Kayla JohnsonAug 3, 2025
Why is my Bissell Vacuum Cleaner leaking?
- M
  Mark JohnsonAug 4, 2025
  If your Bissell Vacuum Cleaner is leaking, it could be due to a couple of reasons. One possible cause is a dirty Brush Roll. To resolve this, place the machine on the 3-in-1 Docking Station and run the Clean Out Cycle. Another reason might be over-saturation of water on the ground. To fix this, turn the machine ON, recline it, and make two passes without dispensing any solution.
J
Jessica FranklinAug 11, 2025
What to do if the Dirty Water Tank icon is illuminated amber on my Bissell Vacuum Cleaner?
- N
  nfisherAug 11, 2025
  If the Dirty Water Tank icon on the Digital Display of your Bissell Vacuum Cleaner is illuminated amber, it could be due to two reasons. First, the Dirty Water Tank might be full. Remove and empty the tank, thoroughly clean both the tank and its sensors, and then place the tank back into the machine. Second, the Dirty Water Tank might not be seated properly. Try reseating the tank to ensure it is correctly in place.
G
Gregory SosaSep 10, 2025
How to fix a Bissell CrossWave Cordless Max 2554 when the battery icon shows 3 red lights?
- K
  Kristen CurtisSep 12, 2025
  If the battery icon on the Digital Display of your Bissell Vacuum Cleaner shows 3 red lights, it indicates a Brush Roll obstruction. Remove any hair and debris from the Brush Roll Window, the Brush Roll itself, and the gear at the end of the foot.

Bissell CrossWave Cordless Max 2554 Series Specifications

General

Style	wet/dry vacuums
Color	black/pearl white, multi
Floor Type	carpet, hardwoods, laminate, tile
Dust Bin Capacity	0.2 gallons
Filter	pleated
Bagless	yes
Wet And Dry Cleaning	yes
?leaning Area	9.5 inches
Brushes and Accessories	multi-surface brush roll (2x)
Voltage	36 volts
Battery Life	30 minutes
Battery Charging Time	240 minutes