EasyManua.ls Logo

Bissell CROSSWAVE PET PRO - User Manual

Bissell CROSSWAVE PET PRO
16 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
CROSSWAVE
®
PET PRO
_______________
USER GUIDE
2305, 2306 SERIES

Table of Contents

Other manuals for Bissell CROSSWAVE PET PRO

Preview: Manual
Manual40 pages

Questions and Answers

  • K
    Kenneth BradfordJul 28, 2025
    Why does my Bissell CROSSWAVE PET PRO have a loss of suction power?
    • J
      jharveyJul 28, 2025
      There are several reasons why your Bissell Vacuum Cleaner might be experiencing a loss of suction power: * The tanks may not be seated properly. Remove both tanks and reseat them to ensure they fit correctly. * The dirty tank may have reached its maximum capacity. Empty the dirty tank, making sure to use slow, back-and-forth cleaning passes. * The brush window might not be latched in place. Turn the power off, unplug the machine, and reinstall the brush window. * The debris channel in the foot could be clogged. Clean the channel with a paper towel. * The filter may be clogged by debris. Remove any debris clogging the filter screen and clean the filter.
  • K
    Kirsten RussellAug 3, 2025
    Why is my Bissell CROSSWAVE PET PRO Vacuum Cleaner not spraying?
    • R
      Richard ElliottAug 3, 2025
      If your Bissell Vacuum Cleaner isn't spraying, it could be due to several reasons: * The clean water tank might be empty. Refill the tank. * The clean water tank might not be seated completely. Turn the power off, then remove and reseat the tank. * The system might not be fully primed. Hold the trigger for 10 to 15 seconds to prime it. * The brush window might not be latched in place. Turn the power off, unplug the machine, and reinstall the brush window. * You might not be holding the trigger continuously. Hold the trigger while using the machine. * The spray tips on the foot could be clogged. Use a pin to clean the spray tips located underneath the brush roll window.
  • G
    George SmithAug 9, 2025
    What to do if my Bissell Vacuum Cleaner brush roll is not turning?
    • A
      avilaamberAug 9, 2025
      If the brush roll on your Bissell Vacuum Cleaner isn't turning, consider these potential causes: * The brush roll might not be installed properly. Turn the power off, unplug the machine, and follow the instructions to replace the brush roll. * The machine might be standing upright. Recline the machine to activate the brush roll. * An obstruction might be preventing the brush roll from turning. Turn the power off, unplug the machine, remove the brush window and brush roll, and clean any hair or string from the brush ends.
  • S
    shanedixonAug 15, 2025
    What to do if my Bissell Vacuum Cleaner machine won’t turn on?
    • H
      hobbsjamesAug 15, 2025
      If your Bissell Vacuum Cleaner won't turn on, it could be due to the following reasons: * An obstruction may have stopped the brush roll and shut down the machine. Unplug the machine to reset the system. While it's unplugged, remove the brush window and brush roll, cleaning any hair or string from the brush ends. * The handle might not be properly inserted into the body of the machine. Remove the handle and re-insert it, pushing down until you hear a 'click'.
  • M
    Mark ElliottAug 21, 2025
    Why is my Bissell CROSSWAVE PET PRO Vacuum Cleaner machine leaking?
    • K
      Kelly ScottAug 21, 2025
      If your Bissell Vacuum Cleaner is leaking, it might be because the cap of the clean water tank isn't closed properly. Remove the clean water tank and re-apply the cap securely.

Summary

Important Safety Instructions

General Safety Precautions

Basic precautions for using the appliance to prevent fire, shock, or injury.

Grounding Instructions

Details on proper grounding for electrical safety.

Assembly and Cleaning Formulas

Product Assembly Guide

BISSELL Cleaning Formulas

Filling Your Clean Water Tank

Water Tank Filling Procedure

Cleaning Your Hard Floors

Hard Floor Cleaning Steps

Instructions on how to clean hard floors using the CrossWave® Pet Pro.

Cleaning Area Rugs

Area Rug Cleaning Steps

Instructions on how to clean area rugs using the CrossWave® Pet Pro.

Troubleshooting

Common Problems and Solutions

A guide to common issues and their corresponding remedies.

Bissell CROSSWAVE PET PRO Specifications

General IconGeneral
Power sourceAC
Suction power32 AW
AC input voltage220 - 240 V
Maximum input power560 W
Product typeUpright vacuum
Dust capacity0.62 L
Product colorBlack, Blue, Silver
Country of originChina
Dust container typeBagless
Clean water tank capacity0.82 L
Removable handheld vacuumYes
Number of brushes1
Vacuum brushes includedRoller brush
Noise level76 dB
Cleaning typeDry&wet
Cleaning surfacesCarpet, Hard floor
Vacuum air filtering-
Dirt separating methodFiltering
Package depth283 mm
Package width349 mm
Package height692 mm
Package weight7480 g
Quantity per pack1 pc(s)
Quantity per pallet24 pc(s)
Quantity per intermodal container (20ft)499 pc(s)
Quantity per intermodal container (40ft)1027 pc(s)
Quantity per intermodal container (40ft, HC)1132 pc(s)
Cord length7.6 m
Weight and Dimensions IconWeight and Dimensions
Depth230 mm
Width300 mm
Height1168 mm
Weight5000 g

Videos

How to Assemble and Use Your CrossWave Pet Pro

How to Clean the Bissell CrossWave Pet Pro with Rinse & Storage Tray

How to install brush roll on Bissell Crosswave Pet Pro

Related product manuals