Bissell CrossWave 1713 SERIES User Manual (English)

Other manuals for Bissell CrossWave 1713 SERIES

Questions and Answers:

K
Kenneth VillaJul 27, 2025
Why does my Bissell CrossWave 1713 Vacuum Cleaner have no suction?
- J
  Jonathan BrennanJul 27, 2025
  Loss of suction power in your Bissell Vacuum Cleaner can occur due to several reasons. The tanks may not be seated properly, so ensure both tanks are correctly fitted. Also, the dirty tank might be full; empty it if it has reached the full line. Another cause may be that the brush window is not latched in place. Additionally, the debris channel in the foot or the filter might be clogged; clean these to restore suction.
B
brittney72Aug 2, 2025
How to fix reduced spray or no spray in Bissell CrossWave 1713 Vacuum Cleaner?
- J
  Jocelyn ConnerAug 2, 2025
  If your Bissell Vacuum Cleaner has reduced or no spray, it could be due to several reasons. First, check if the clean water tank is empty and refill it if needed. Ensure the tank is completely seated. Prime the system by holding the trigger for 10 to 15 seconds. Make sure the brush window is latched in place. Hold the trigger continuously while using the machine. Finally, the spray tips on the foot might be clogged; clean them with a pin.
F
Fernando RossAug 8, 2025
What to do if my Bissell CrossWave 1713 Vacuum Cleaner brush roll is not turning?
- M
  msharpAug 8, 2025
  If the brush roll on your Bissell Vacuum Cleaner isn't turning, first ensure the machine is reclined, as the brush roll is designed to operate when not upright. Also, turn the power OFF, unplug the machine, and check if the brush roll is installed properly, following the instructions on page 11 for replacing it. An obstruction may also be the cause; in that case, turn the power OFF, unplug the machine, remove the brush window and brush roll to clear any obstructions.
J
jessicamcgrathAug 14, 2025
How to fix reduced or no spray on Bissell CrossWave 1713 Vacuum Cleaner?
- A
  adrian02Aug 14, 2025
  If your Bissell Vacuum Cleaner has reduced or no spray, several issues could be the cause. First, make sure the clean water tank is filled. Next, ensure the tank is correctly seated. It might also be that the system isn’t primed, so hold the trigger for 10-15 seconds. Also, check that the brush window is latched. Remember to hold the trigger while using the machine. Finally, the spray tips on the foot might be clogged; clean them with a pin.
M
msilvaAug 20, 2025
Why is the brush roll not turning on my Bissell CrossWave 1713?
- S
  Sabrina GillAug 20, 2025
  If the brush roll on your Bissell Vacuum Cleaner isn't turning, it could be due to a few reasons. Ensure the machine is reclined, as the brush roll is designed to turn on when the machine is not standing upright. Also, check for any obstructions that may be preventing the brush roll from turning. Turn the power OFF, unplug the machine, remove the brush window and brush roll to clear any obstructions.

Bissell CrossWave 1713 SERIES Specifications

General

Weight	11.5 lbs
Tank Capacity	28 oz
Cleaning Path Width	10.5 inches
Cord Length	25 feet
Surface Type	Hard floors and area rugs
Power Source	Corded Electric
Model Number	1713
Voltage	120V
Special Features	Multi-Surface Cleaning