Bissell CROSSWAVE 17132

Questions and Answers

B
Benjamin BurnsJul 29, 2025
Why does my Bissell Vacuum Cleaner have no suction?
- D
  Dorothy Gardner MDJul 30, 2025
  There are several reasons why your Bissell Vacuum Cleaner might be experiencing a loss of suction power. First, ensure that both the clean and dirty water tanks are properly seated on the machine. If the dirty water tank is full, empty it. Also, check if the brush window is securely latched in place. A clogged debris channel in the foot can also cause suction loss; clean it with a paper towel or the Easy Clean Storage Tray. Lastly, a clogged filter can restrict suction, so remove any debris from the filter screen and clean the filter.
R
Robert CarsonAug 8, 2025
How to fix reduced or no spray on Bissell CROSSWAVE 17132 Vacuum Cleaner?
- M
  Misty SmithAug 8, 2025
  If your Bissell Vacuum Cleaner has reduced or no spray, several issues could be the cause. First, make sure the clean water tank is filled. Next, ensure the tank is correctly seated. It might also be that the system isn’t primed, so hold the trigger for 10-15 seconds. Also, check that the brush window is latched. Remember to hold the trigger while using the machine. Finally, the spray tips on the foot might be clogged; clean them with a pin.
T
Thomas CrawfordAug 19, 2025
Why is the brush roll not turning on my Bissell CROSSWAVE 17132 Vacuum Cleaner?
- A
  Andrew DuffyAug 20, 2025
  If the brush roll on your Bissell Vacuum Cleaner isn't turning, it could be due to a few reasons. Ensure the machine is reclined, as the brush roll is designed to turn on when the machine is not standing upright. Also, check for any obstructions that may be preventing the brush roll from turning. Turn the power OFF, unplug the machine, remove the brush window and brush roll to clear any obstructions.
M
MIKHAILAug 20, 2025
Hello! Can you tell me the assembly diagram for the Bissell CROSSWAVE 17132 vacuum cleaner, or where this hose is connected inside the vacuum cleaner?
М
МихаилAug 14, 2025
Здравствуйте! Куда вставляется четвёртый гибкий шланг внутри пылесоса или он так должен болтаться?

Summary

Important Safety Instructions

Getting to Know Your CrossWave

Assembly

Filling the Clean Water Tank

Cleaning Hard Floors

Cleaning Area Rugs

Maintenance: Empty Dirty Water Tank

Maintenance: Brush Roll and Chamber Cleaning

Maintenance: Easy Clean Storage Tray

Troubleshooting

Consumer Guarantee

Limited Two-Year Guarantee

Details BISSELL's commitment to repair or replace defective products within two years from the purchase date.

Exceptions and Exclusions from Guarantee Terms

Outlines limitations on the guarantee coverage, excluding commercial use and user-caused damage.

Consumer Care

Bissell CROSSWAVE 17132 Specifications

General

Product type	Stick vacuum
Dust capacity	0.62 L
Product color	Blue, Titanium
Country of origin	China
Dust container type	Bagless
Clean water tank capacity	0.82 L
Removable handheld vacuum	-
Power source	AC
Suction power	32 AW
AC input voltage	220 - 240 V
Maximum input power	560 W
Noise level	80 dB
Cleaning type	Dry&wet
Cleaning surfaces	Carpet, Hard floor
Multifunctional brush	Yes
Dirt separating method	Filtering
Cord length	7.5 m
Number of brushes	1
Package depth	283 mm
Package width	349 mm
Package height	692 mm
Package weight	7480 g
Quantity per pack	1 pc(s)
Quantity per pallet	19 pc(s)
Quantity per intermodal container (20ft)	447 pc(s)
Quantity per intermodal container (40ft)	936 pc(s)
Quantity per intermodal container (40ft, HC)	1038 pc(s)