Bissell MULTICLEAN ALLERGEN PET User Manual

Product Overview
1. Carpet Type Control
2. Hose
3. Quick Release Extension Wand
4. Dirt Tank Release Button
5. Power Switch
6. Brush Roll Switch
7. Pre-Motor Filter
8. Dirt Tank
9. Post-Motor Filter
Go online for a comprehensive walkthrough
of your new purchase!
This guide has everything you need to get ready for first use,
including setting up, using and maintaining your machine,
but online you’ll find additional resources like tips and
troubleshooting, videos, product registration, parts, and more.
Go to support.BISSELL.com.
MULTICLEAN ALLERGEN PET
MODELS 2849, 2999
2
3
7
8
9
1
4
5
6
Warranty ............................................................................... 2
What’s in the Box? .........................................................3
Assembly .............................................................................. 3
Using Your Vacuum ....................................................... 4
Above Floor Cleaning ..................................................4
Emptying the Dirt Tank...............................................5
Cleaning the Inner Cyclone Separator .............5
Cleaning and Replacing the Filters .....................6
Protecting the Vacuum’s Motor ............................ 7
Troubleshooting ...............................................................7

Bissell MULTICLEAN ALLERGEN PET Specifications

General

Type	Upright
Brush Roll	Tangle-Free Brush Roll
Surface Type	Carpet, Upholstery, Hard Floors
Brushroll On/Off Switch	Yes
Power Source	Corded Electric
Voltage	120 V
Tools Included	Crevice tool
Weight	18 pounds
Dirt Tank Capacity	1.5 L
Cord Length	30 feet

Summary

Warranty Information

What's in the Box

Assembly Instructions

Attach Wand to Vacuum Base

Connect the wand to the main vacuum base for initial setup.

Attach Stretch Hose to Wand

Securely twist the stretch hose onto the vacuum wand clockwise.

Attach Stretch Hose to Vacuum

Connect the stretch hose to the rear of the vacuum unit by twisting.

Attach Hose Clip

Clip the hose onto the vacuum body for storage and stability.

Position Hose Correctly

Ensure the assembled hose is free of twists for optimal performance.

Attach Tools to Holders

Securely attach any included tools to their designated holders on the vacuum.

Using Your Vacuum

Power and Brush Roll Control

Turn power ON and manage Brush Roll for carpet or hard surfaces.

Reclining the Vacuum

Step on the base and pull the handle back to recline for use.

Carpet Type Control Adjustment

Adjust the control for optimal cleaning on high, medium, or low pile carpets.

Above Floor Cleaning Guide

Clean Hard-to-Reach Spaces

Use the Quick Release Extension Wand for accessing tight areas.

Detaching Stretch Hose

Remove the stretch hose from the extension wand by twisting its cuff.

Attaching Cleaning Tools

Connect the desired tool to the wand or hose for specific cleaning tasks.

Emptying the Dirt Tank

Remove Dirt Tank

Press release button and pull the dirt tank away from the vacuum.

Empty Dirt Tank Contents

Hold tank over trash, press empty button, then reattach bottom.

Return Dirt Tank to Vacuum

Secure the tank bottom first, then push back until it clicks.

Cleaning the Inner Cyclone Separator

Empty Separator Contents

Hold separator over trash, press bottom release button to empty.

Remove Cyclone Separator

Twist the separator counter-clockwise and pull downwards to detach.

Rinse and Dry Separator

Tap separator, rinse if needed, and ensure it's completely dry before reassembly.

Cleaning and Replacing Filters

Pre-Motor Filter Maintenance

Steps for removing, cleaning, drying, and reinstalling pre-motor filters.

Post-Motor Filter Replacement

Procedure for removing, cleaning, and reattaching the post-motor filter.

Protecting the Vacuum's Motor

Troubleshooting Common Issues

Vacuum Hard to Push or Pull

Addresses issues with suction adjustment or clogs in the vacuum.

Vacuum Won't Pick Up Dirt

Solutions for clogs, dirty filters, or incorrect carpet type settings.

Brush Roll Doesn't Rotate

Covers troubleshooting for brush roll switch, position, and debris entanglement.

Excessive Loud Noise

Guidance on clearing clogs from hoses and brush areas, and cleaning filters.