To Next PageTo Next PageWhat to do if my Bissell Vacuum Cleaner won’t turn on?
If your Bissell Vacuum Cleaner won’t turn on, first ensure the power cord is properly plugged into the electrical outlet. Also, check your fuse or breaker. Replace the fuse or reset the breaker if necessary.
Why is dirt escaping from my Bissell PowerEdge 81L2 Vacuum Cleaner?
If you see dirt escaping from your Bissell Vacuum Cleaner, start by emptying the dirt tank. Then, check the filter to ensure it is correctly installed. Also, make sure the dirt tank is properly installed and that the separator grill is correctly positioned in the upper tank.
How to fix low suction on a Bissell PowerEdge 81L2 Vacuum Cleaner?
If your Bissell Vacuum Cleaner has low suction, the dirt tank might be full, so empty it. Also, ensure the dirt tank and separator grill are correctly installed. Check for any clogs in the vacuum and clear them. Remove any debris from the separator grill. Ensure the foot is fully inserted into the body of the unit. If the issue persists, you may need to order replacement filters from BISSELL’s website or by calling their customer service.
General| Brand | Bissell |
|---|---|
| Model | PowerEdge 81L2 Series |
| Category | Vacuum Cleaner |
| Language | English |
Step-by-step guide on how to remove, empty, and replace the dirt container.
Instructions for removing, cleaning, and reinstalling the separator grill for optimal performance.
Detailed instructions for cleaning and replacing the foam and pleated filters in the vacuum.
Steps to identify and remove clogs in the dirt container, suction inlet, or foot for proper suction.
Explanation of the thermal protector feature and steps to take if the vacuum motor stops due to overheating.
Lists possible causes and remedies for the vacuum cleaner failing to power on.
Identifies common reasons for low suction and provides solutions for each.
Explains why dirt might escape and offers corrective actions for common causes.
