How to fix a Bissell Vacuum Cleaner that won’t turn on?
If your Bissell Vacuum Cleaner won’t turn on, start by checking the electrical plug to ensure it is properly plugged in. Also, inspect the fuse or breaker; replace the fuse or reset the breaker if necessary.
Why is my Bissell Vacuum Cleaner not picking up dirt?
If your Bissell Vacuum Cleaner isn’t picking up dirt, start by ensuring the hose is firmly attached to the suction opening. Then, empty the dirt container. Also, check the hose for cracks or holes and replace it if needed. Make sure that the dirt container or secondary cyclone are correctly positioned and locked in place. Finally, check for debris build-up or clogs in the inner tank, hose, and foot/lower hose, and inspect and clean the pre-motor and post-motor filters.
What to do if visible dirt is escaping from my Bissell POWERGLIDE LIFT-OFF PET PLUS 2043?
If you see dirt escaping from your Bissell Vacuum Cleaner, the first thing to do is empty the dirt container. Next, check that the secondary cyclone, pre-motor, and post-motor filters are correctly installed. Finally, make sure the dirt container is properly inserted.
How to restore power to the rotating floor brush on my Bissell POWERGLIDE LIFT-OFF PET PLUS 2043?
If your Bissell Vacuum Cleaner's rotating floor brush has no power, ensure the pod is securely seated by removing and replacing it until it clicks into place. Check that the brush switch is in the "ON" position and recline the vacuum to operate the brush.
General| Brand | Bissell |
|---|---|
| Model | POWERGLIDE LIFT-OFF PET PLUS 2043 SERIES |
| Category | Vacuum Cleaner |
| Language | English |
Lists crucial safety precautions for operating the vacuum cleaner.
Explains the polarized plug feature and its electrical safety implications.
Explains how to use the cord release and store the power cord.
To Next Page