Bissell POWERGLIDE LIFT-OFF PET User Manual

QUICK START GUIDE
2043 SERIES
1. Slide handle into vacuum
base and attach with the
screw that is taped to the
handle.
2. Attach hose by lining
the tabs on the cu with
the notches on the back of
vacuum. Twist clockwise to
lock hose into place.
3. Push handle end into
base of vacuum on
opposite side.
4. Slide the Pet TurboEraser®
Tool holder down on the top
back of the base.
5. Slide the Crevice Tool/
Extension Wand holder
down onto the middle of
the back of base. Store
both tools in the holder.
Assembly Instructions
WARNING
Refer to the enclosed user guide for complete
instructions and important safety notices.
POWERGLIDE
®
LIFT-OFF PET
UPRIGHT VACUUM
161-1026 11/16 RevA
PARTS INCLUDED
Combination
Dusting/Crevice
Tool
Crevice Tool/
Extension Wand
Holder
Hose
Base Unit
Upper
Handle
PetTurboEraser®
Tool Holder
Pet TurboEraser®
Tool
Extension
Wand
Pet Hair Eraser®
Tool (only available
select models)

Bissell POWERGLIDE LIFT-OFF PET Specifications

General

Brand	Bissell
Model	POWERGLIDE LIFT-OFF PET
Category	Vacuum Cleaner
Language	English

Summary

Vacuum Assembly Instructions

Attach Handle to Base

Slide handle into vacuum base and secure with the provided screw.

Connect Vacuum Hose

Align hose tabs with vacuum notches and twist clockwise to lock.

Insert Handle End into Base

Push the upper handle firmly into the opposite side of the vacuum base.

Mount Pet TurboEraser Tool Holder

Slide the Pet TurboEraser Tool holder onto the top back of the vacuum base.

Mount Accessory Holders

Attach holders to the middle back of the base for tools and store them.

Optional Febreze Filter Usage

Using the Febreze Filter

Press tank release, pull dirt tank away, and insert the Febreze filter.

Replacing Foam Filter

Replace black/yellow foam filter with black Febreze filter, covering the mesh.

Filter Cleaning Procedures

Washable Filters

Unplug vacuum, remove tank, lift filter cover tab to access and wash both filters.

Post-Motor Filter Maintenance

Remove and gently tap the front post-motor filter; it is not washable.

Reinstall Post-Motor Filter

Push the post-motor filter straight back into place until it clicks.