Bissell POWERTRAK 1808 Series User Manual (English)

Questions and Answers:

K
Katie NormanAug 5, 2025
Why won't my Bissell POWERTRAK 1808 Vacuum Cleaner pick up dirt?
- S
  Steven ChavezAug 5, 2025
  There are several reasons why your Bissell Vacuum Cleaner might not be picking up dirt. The filter could be dirty, so remove and rinse the pre-motor filter, and allow it to dry completely before reinserting. The main hose might not be connected; reconnect it by pushing the hose connection until the latch is secure. Also, check the main hose for cracks or holes. If there's damage, you'll need to order a new main hose from the Bissell website. Other potential issues include worn brush roll bristles (replace the brush roll), a clog in the vacuum (remove any debris), or the dirt container not being seated correctly (release and reseat the dirt container properly).
O
Olivia MccoyAug 13, 2025
What to do if dirt is escaping from my Bissell POWERTRAK 1808 Vacuum Cleaner?
- D
  Denise HoffmanAug 14, 2025
  If dirt is escaping from your Bissell Vacuum Cleaner, there are a few things to check. First, the dirt container may be full, so empty it. Next, ensure that all filters are in place. Finally, make sure the dirt container is properly seated. To reseat it, press the Empty Button to remove the Dirt Container, then return it, inserting the bottom first and pivoting the Dirt Container towards the vacuum until you hear a 'click' sound.
H
hunteryatesAug 21, 2025
How to fix a Bissell Vacuum Cleaner brush roll that doesn’t rotate?
- K
  Kathryn WrightAug 21, 2025
  If the brush roll on your Bissell Vacuum Cleaner isn’t rotating, it could be due to a broken or stretched belt. Also, the brush roll might have debris or other entanglements preventing it from rotating. Check the brush roll and remove any debris. Also, check the belt for any breaks or tears and replace it if necessary.
E
Evelyn WadeAug 27, 2025
Why is my Bissell POWERTRAK 1808 so hard to push?
- T
  Terri BrownAug 27, 2025
  If your Bissell Vacuum Cleaner is hard to push, the height adjustment knob might be set too low. Try placing the knob on the highest setting to see if that makes a difference.