Bissell PROHEAT 2X REVOLUTION 1551 SERIES User Manual (English)

Other manuals for Bissell PROHEAT 2X REVOLUTION 1551 SERIES

Questions and Answers:

R
Rebecca HoodAug 14, 2025
Why is my Bissell PROHEAT 2X REVOLUTION 1551 Vacuum Cleaner losing suction power?
- S
  Sarah ColemanAug 14, 2025
  If your Bissell Vacuum Cleaner loses suction power, several factors could be the cause: * The tanks might not be seated correctly. Try picking up both tanks and reseating them to ensure they fit properly. * The Dirty Water Tank might be full. Empty the Dirty Water Tank if it has reached the maximum fill line. * The Clean Water Tank might be empty. Check and refill the Clean Water Tank if necessary. * The rubber tab on the Dirty Water Tank might not be sealed. Check the rubber tab and press firmly on all edges to secure it tightly. * The Accessory Hose Door might not be closed tightly. Ensure the Accessory Hose Door is locked into place. * The nozzle may be clogged. Use the Nozzle Clean Out Tool to clean the nozzle.
J
Joshua HarrisonAug 17, 2025
How to fix reduced spray on Bissell PROHEAT 2X REVOLUTION 1551?
- M
  Melissa SmithAug 17, 2025
  If your Bissell Vacuum Cleaner has reduced spray or no spray, it could be due to a few reasons: * The Clean Water Tank might be empty. Refill the tank. * The Clean Water Tank might not be seated completely. Turn the power OFF, remove, and reseat the tank. * The pump may have lost prime in Hose Cleaning Mode. Hold the end of the hose below the water level in the tank to prime it.
T
Timothy CohenAug 21, 2025
Why is there a loss of suction power in my Bissell Vacuum Cleaner?
- J
  John RogersAug 21, 2025
  Loss of suction power in your Bissell Vacuum Cleaner can occur due to several reasons. First, ensure that both tanks are correctly seated on the unit. Secondly, the dirty tank might be full; empty it if it has reached the maximum fill line. Also, check the clean water tank and refill if empty. Make sure the rubber tab on the dirty water tank is sealed tightly. Verify that the Accessory Hose Door is closed and locked in place. Lastly, the nozzle could be clogged; use the nozzle clean out tool to clean it.
M
Mathew VanceAug 25, 2025
How to prime the hose on Bissell PROHEAT 2X REVOLUTION 1551 Vacuum Cleaner?
- B
  brandy44Aug 25, 2025
  If there is no spray through the hose and tool of your Bissell Vacuum Cleaner, the hose to your machine may not be primed. With the machine OFF and unplugged, remove the nozzle from the foot. Place a ball point pen in the black cylinder next to the screw. When water bubbles up, remove the pen. Reassemble the nozzle and hose.
R
Robert SmithAug 27, 2025
How to fix reduced spray or no spray on a Bissell Vacuum Cleaner?
- Z
  zimmermanbethAug 27, 2025
  If your Bissell Vacuum Cleaner has reduced or no spray, the clean water tank might be empty. Refill the tank. Alternatively, the clean water tank might not be seated completely. Turn the power OFF, then remove and reseat the tank properly.
H
Hannah WilkinsonAug 30, 2025
What to do if my Bissell PROHEAT 2X REVOLUTION 1551 Vacuum Cleaner has reduced spray or no spray?
- I
  iclarkAug 31, 2025
  If your Bissell Vacuum Cleaner has reduced or no spray, consider these possible causes: * The clean water tank may be empty. Refill the tank. * The clean water tank may not be seated completely. Turn the power OFF, then remove and reseat the tank. * The pump may have lost prime in hose cleaning mode. Hold the end of the hose below the water level in the tank to prime it.
G
ghernandezSep 3, 2025
Why is there no spray through the hose and tool of my Bissell PROHEAT 2X REVOLUTION 1551?
- C
  campbellaudreySep 3, 2025
  If there is no spray through the hose and tool of your Bissell Vacuum Cleaner, the hose to your machine may not be primed. With the machine off and unplugged, remove the nozzle from the foot. Place a ball point pen in the black cylinder next to the screw. When water bubbles up, remove the pen. Reassemble the nozzle and hose.
J
Jamie WardSep 6, 2025
What to do if my Bissell Vacuum Cleaner tank is leaking?
- W
  watkinslisaSep 6, 2025
  If your Bissell Vacuum Cleaner tank is leaking, it may have been over-filled. Make sure your tank has the correct amount of water and formula. With the cap twisted on tightly, hold your tank at an angle over a sink or drain, so any extra water can pour out of the space. Wipe the tank dry with a cloth.
R
Robert GrossSep 9, 2025
What to do if my Bissell Vacuum Cleaner has no power?
- K
  Kimberly NguyenSep 9, 2025
  If your Bissell Vacuum Cleaner has no power, consider these potential causes: * You might be mistaking the Cleaning Mode switch for the Power Button. Press the Power Button on the left side of the machine to turn it ON. * The outlet may not be active. Test the outlet by plugging in a different device that uses a grounded outlet.

Bissell PROHEAT 2X REVOLUTION 1551 SERIES Specifications

General

Model Number	1551 Series
Type	Upright Carpet Cleaner
Power Rating	6.8 Amps
Tank Capacity	1 gallon
Power Cord Length	22 feet
Heated Drying System	Yes
Cleaning Path Width	11 inches