Bissell QuickSteamer 1770 SERIES

To Next Page

To Previous Page

w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

Troubleshooting

Reduced spray or no spray

Possible Cause Remedy

1. Clean tank empty 1. Refill tank with water

and formula

2. Lint screen on solution tank cap clogged 2. Soak solution tank cap in warm

water and then rinse under

running water

Deep cleaner not picking up cleaning solution

Possible Cause Remedy

1. Collection tank not aligned/secured 1. Check tank proper alignment

and secure with side latches

2. Dirty tank full 2. Empty tank

3. Removable nozzle installed improperly 3. Align four "hooks" into bottom

first, then snap into place on top

4. Removable nozzle full of debris 4. Remove nozzle and rinse under

running water

5. Red lint screen under collection tank clogged 5. Remove debris from lint screen

Other Maintenance or Service not included above should be performed by

an authorized service representative.

Thank you for selecting a BISSELL product.

Please do not return this product to the store

For any questions or concerns, BISSELL is happy to be of service.

Bissell QuickSteamer 1770 SERIES - Troubleshooting